Setting The Humidity Alarm; Temperature Setting - Westfalia 94 53 07 Original Instructions Manual

2. Close the battery compartment with the cover. Replace both
batteries if the display gets weaker.

Setting the Humidity Alarm

Press and hold the
SET Button
Press or
Press the SET
Button
Press or
Press the SET
Button and wait for
10 Sec
Press the ON/OFF
Button

As soon as the humidity rises over or falls under the threshold
values set by you the respective symbol
alarm signal flash simultaneously.

The alarm flashes for 1 minute. To end the alarm press any
button.

To deactivate the humidity alarm briefly press the ON/OFF
buttons. The symbols disappear. To activate the alarm press the
ON/OFF Buttons again.
Setting the Temperature Display

Press the °C/°F button to switch between degrees centigrade and
degrees Fahrenheit.
Operation
Symbols ALERT and
Display and the Humidity Display flashes
Set the upper Threshold Value in 5% Steps
Symbols ALERT and
Display and the Display flashes
Set the lower Threshold Value in 5% Steps
Display returns to normal Mode
Activate or deactivate the Humidity Alarm
16
appear in the
appear in the
and the red LED