HP 4262A Operating And Service Manual page 60

Section II
Paragraphs 3-71 to 3-75
3-71. Remote/Local Capability: RL1.
The 4262A goes to Remote Status only when it
accepts Listen address with REN (Remote Enable)
line in the Bus lines set to "1". Remote status is
not obtained if REN line is set to "1" after Listen
address is received. Remote status is returned to
Local status when one of following conditions is
present:
(i) REN line is set to "0".
(2) LOCAL switch on front panel is depressed.
(3) GTL (Go To Local) command is received.
Local Lock Out: LLO
3-72. Device Clear Capability: DC1.
3-73. Device Trigger Capability: DT1.
A5 A4 A3 A2 Al
0 0 0 0 OO eee 0
Model 4262A