Table of Contents
Advertisement
8. Tip: Avoid pinching the wires. Insert the
Console Bracket (3) into the Upright (2). Attach
the Console Bracket with two M8 x 68mm
Screws (125).
Connect the wires from the Console (4)
to the Main Wire (141), the Right and Left
Control Wires (12, 13), and the Accelerometer
Wire (138).
9. Tip: Avoid pinching the wires. Attach the
Upper Neck Cover (17) to the Upper Bridge
Cover (16) with an M4 x 16mm Screw (98).
10. Make sure that all parts are properly tightened before you use the elliptical. Note: Extra parts may be
included. Place a mat beneath the elliptical to protect the floor.
All manuals and user guides at all-guides.com
8
125
9
11
3
12
2
17
98
16
4
Avoid pinching
the wires
141
13
138
125
Avoid pinching
the wires
Advertisement
Table of Contents
