1. Manuals
  2. Brands
  3. ICON Manuals
  4. Elliptical Trainer
  5. NordicTrack COMMERCIAL 14.9
  6. User manual

ICON NordicTrack COMMERCIAL 14.9 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
nordictrack.com
Model No. NTEL71418.4
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today,
go to my.nordictrack.com.
CUSTOMER CARE
For service at any time, go to
nordictrackservice.com.
Or call 1-800-TO-BE-FIT
(1-800-862-3348)
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–12 p.m. MT
Please do not contact the store.
CAUTION
Read all precautions and
instructions in this manual before
using this equipment. Keep this
manual for future reference.
USER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for ICON NordicTrack COMMERCIAL 14.9

Summary of Contents for ICON NordicTrack COMMERCIAL 14.9

  • Page 1 nordictrack.com USER’S MANUAL Model No. NTEL71418.4 Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to my.nordictrack.com. CUSTOMER CARE For service at any time, go to nordictrackservice.com.

  • Page 2: Table Of Contents

    Note: The decal(s) may not be shown at actual size. NORDICTRACK and IFIT are registered trademarks of ICON Health & Fitness, Inc. Google Maps is a trademark of Google LLC. The Bluetooth word mark and logos are registered trademarks of Bluetooth SIG, Inc. and are ®...

  • Page 3: Important Precautions

    To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your elliptical before using your elliptical. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product.
  • Page 4 18. The elliptical does not have a freewheel; the 20. Over exercising may result in serious injury pedals will continue to move until the fly- or death. If you feel faint, if you become short wheel stops. Reduce your pedaling speed in of breath, or if you experience pain while a controlled way.
  • Page 5 STANDARD SERVICE PLANS...

  • Page 6: Before You Begin

    BEFORE YOU BEGIN Thank you for selecting the revolutionary reading this manual, please see the front cover of this NORDICTRACK COMMERCIAL 14.9 elliptical. The manual. To help us assist you, note the product model ® COMMERCIAL 14.9 elliptical provides an impressive number and serial number before contacting us.

  • Page 7: Part Identification Chart

    PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly.

  • Page 8: Assembly

    ASSEMBLY • Assembly requires two persons. one Phillips screwdriver • Place all parts in a cleared area and remove the two adjustable wrenches packing materials. Do not dispose of the packing materials until you finish all assembly steps. one rubber mallet •...
  • Page 9 3. With the help of a second person, place some of the packing materials (not shown) under the front of the Frame (1). Have the second per- son hold the Frame to prevent it from tipping while you complete this step. If there are shipping supports attached to the front of the Frame (1), remove the screws from the shipping supports, and discard the screws...
  • Page 10 5. Orient the Upright (4) as shown. Have a second person hold the Upright near the Frame (1). Next, locate the wire tie (A) in the lower end of the Upright (4). Tie the wire tie to the Main Wire (110) as shown in the inset drawing.
  • Page 11 7. Apply grease to the axle on the right side of the Upright (4). Next, slide a Pivot Spacer (54) onto the right side of the Upright (4). 4 Grease Then, identify the Right Upper Body Leg (60), orient it as shown, and slide it onto the right side of the Upright (4).
  • Page 12 9. Apply grease to one of the Pedal Arm Axles (64). Insert the Pedal Arm Axle (64) into the Right Upper Body Leg (60) and the Right Pedal Arm (58) from the direction shown. Next, slide an M8 x 22mm Washer (129) onto an M8 x 13mm Screw (82), and tighten the Screw a few turns into the Pedal Arm Axle (64).
  • Page 13 11. Orient the Rear Console Cover (80) as shown, and attach it to the Upright (4) with two M4 x 16mm Screws (101). Then, orient the Front Console Cover (79) as shown, and attach it to the Rear Console Cover (80) with two M4 x 16mm Screws (101).
  • Page 14 14. Identify the Right Upper Body Arm (61), orient it as shown, and hold it near the Right Upper Body Leg (60). Avoid pinching the wires See the left inset drawing. Insert the Right Extension Wire (147) into the Right Upper Body Leg (60) and route it out of the indicated hole (E).
  • Page 15 16. Identify the Right Leg Inner Cover (83), orient it as shown, and insert it through the Right Upper Body Leg (60). Next, identify the Right Leg Outer Cover (69), orient it as shown, and press it onto the Right Leg Inner Cover (83).

  • Page 16: The Chest Heart Rate Monitor

    THE CHEST HEART RATE MONITOR HOW TO PUT ON THE HEART RATE MONITOR • Store the heart rate monitor in a warm, dry place. Do not store the heart rate monitor in a plastic bag or If the heart rate monitor looks like the one shown in other container that may trap moisture.

  • Page 17: How To Use The Elliptical

    HOW TO USE THE ELLIPTICAL HOW TO PLUG IN THE POWER CORD A temporary adapter may 2-pole Receptacle This product must be grounded. If it should mal- be used to function or break down, grounding provides a path of connect the Adapter least resistance for electric current to reduce the risk power cord...
  • Page 18 HOW TO MOVE THE ELLIPTICAL HOW TO LEVEL THE ELLIPTICAL Due to the size and weight of the elliptical, moving If the elliptical rocks slightly on your floor during use, it requires two persons. Stand in front of the elliptical, turn one or both of the leveling feet (D) beneath the hold the upright (A), and place one foot against one of rear of the frame or turn the leveling foot (E) under...
  • Page 19 HOW TO ADJUST THE POSITIONS OF THE PEDALS Each pedal can be adjusted to several positions. To adjust each pedal, simply pull the pedal handle (G) outward, move the pedal to the desired position, and then release the pedal handle into an adjust- ment hole beneath the pedal.
  • Page 20 CONSOLE DIAGRAM FEATURES OF THE CONSOLE When you use the manual mode of the console, you can change the resistance of the pedals and the incline The advanced console offers an array of features of the ramp with the touch of a button. designed to make your workouts more effective and enjoyable.
  • Page 21 HOW TO TURN ON THE POWER HOW TO SET UP THE CONSOLE IMPORTANT: If the elliptical has been exposed to Before you use the elliptical for the first time, set up the cold temperatures, allow it to warm to room tem- console.
  • Page 22 3. Change the resistance of the pedals and the The console is now ready for you to begin working out. The following pages explain the workouts and other incline of the ramp as desired. features that the console offers. Touch Manual Start and begin pedaling. To use the manual mode, see page 22.
  • Page 23 moving your hands or gripping the contacts If desired, adjust the volume level by pressing tightly. the volume increase and When your pulse is detected, your heart rate decrease buttons on the will be shown. For the most accurate heart console.
  • Page 24 HOW TO USE A MAP WORKOUT OR AN ONBOARD To draw your own map for a workout, see HOW TO WORKOUT CREATE A DRAW-YOUR-OWN-MAP WORKOUT on page 26. 1. Touch the screen or press any button on the console to turn on the console. When you select a workout, the screen will show an overview of the workout that includes details See HOW TO TURN ON THE POWER on...
  • Page 25 If the resistance level and/or incline level is too high When the workout comes to an end, a workout or too low, you can manually override the setting summary will appear on the screen. If desired, you by pressing the Resistance buttons or the Ramp can publish your results using one of the options on buttons.
  • Page 26 HOW TO CREATE A DRAW-YOUR-OWN-MAP If you make a mistake, touch Undo on the left side WORKOUT of the screen. 1. Touch the screen or press any button on the The screen will display the elevation and distance console to turn on the console. statistics for your workout.
  • Page 27 HOW TO USE AN IFIT WORKOUT 4. Select an iFit workout that you have previously added to your schedule on iFit.com. To use an iFit workout, the console must be connected IMPORTANT: Before iFit workouts will load, you to a wireless network (see HOW TO CONNECT TO A must add them to your schedule on iFit.com WIRELESS NETWORK on page 29).
  • Page 28 HOW TO CHANGE CONSOLE SETTINGS 3. View the console tour presentation. IMPORTANT: Some of the settings and features To view a tour presentation that will guide you described may not be enabled. Occasionally, a through the features of the console, touch How It firmware update may cause your console to function Works.
  • Page 29 7. Calibrate the incline system. 4. Set up and manage a wireless network connection. To calibrate the incline system, touch Maintenance, touch Calibrate Incline, and then touch Begin. The When Wi-Fi is enabled, the screen will show a ramp will automatically rise to the maximum incline list of available networks.
  • Page 30 HOW TO USE THE SOUND SYSTEM Note: The console can save 8 devices in its memory. If you have previously paired your device To play music or audio books through the console to the console, you can simply press the Bluetooth sound system while you exercise, plug a 3.5 mm male button to connect your device to the console.

  • Page 31: Fcc Information

    FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 32: Maintenance And Troubleshooting

    MAINTENANCE AND TROUBLESHOOTING MAINTENANCE this will erase all custom settings you have made Regular maintenance is important for optimal to the console. Resetting performance and to reduce wear. Inspect and properly the console requires two tighten all parts each time the elliptical is used. people.
  • Page 33 HOW TO ADJUST THE REED SWITCH HOW TO ADJUST THE DRIVE BELT If the console does not display correct feedback, If the pedals slip while you are pedaling, even while the reed switch should be adjusted. To adjust the the resistance is adjusted to the highest level, the drive reed switch, first press the power switch to the off belt may need to be adjusted.

  • Page 34: Exercise Guidelines

    EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.

  • Page 35: Part List

    PART LIST Model No. NTEL71418.4 R1218A Key No. Qty. Description Key No. Qty. Description Frame/Ramp Roller Rear Stabilizer Left Pedal Handle Access Cover Axle Cover Upright Pivot Spacer M4 x 19mm Screw Retainer Front Stabilizer Roller Arm Bushing Console Large Arm Bearing Roller Guide Right Pedal Arm Crank Bearing Spacer...
  • Page 36 Key No. Qty. Description Key No. Qty. Description M4 x 16mm Screw Long Bumper M8 Locknut M8 x 22mm Washer M6 x 12mm Screw M4 x 12mm Screw M10 x 114mm Screw Adhesive Tape M4 x 25mm Flange Screw Tablet Holder Lower Ramp Cover Tablet Holder Screw Crank Spacer...

  • Page 37: Exploded Drawing

    EXPLODED DRAWING A Model No. NTEL71418.4 R1218A...
  • Page 38 EXPLODED DRAWING B Model No. NTEL71418.4 R1218A...
  • Page 39 EXPLODED DRAWING C Model No. NTEL71418.4 R1218A...

  • Page 40: Ordering Replacement Parts

    This warranty extends only to the original purchaser (customer) and is not transferrable. ICON’s obliga- tion under this warranty is limited to repairing or replacing, at ICON’s option, the product through one of its authorized service providers. All repairs for which warranty claims are made must be preauthorized by ICON.

This manual is also suitable for:

Ntel71418.4

Table of Contents