Advertisement

Quick Links

www.nordictrack.com
Model No. NTEL09811.3
Serial No.
USER’'S MANUAL
Write the serial number in the space
above for reference.
Serial Number Decal
(under frame)
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today, go
to www.nordictrackservice.com/
registration.
CUSTOMER CARE
For service at any time, go to
www.nordictrackservice.com.
Or call 1-800-TO-BE-FIT
(1-800-862-3348)
Mon.––Fri. 6 a.m.––6 p.m. MT
Sat. 8 a.m.––4 p.m. MT
Please do not contact the store.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NordicTrack AUDIOSTRIDER 990 PRO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ICON NordicTrack AUDIOSTRIDER 990 PRO

  • Page 1 www.nordictrack.com Model No. NTEL09811.3 Serial No. USER’’S MANUAL Write the serial number in the space above for reference. Serial Number Decal (under frame) ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to www.nordictrackservice.com/ registration. CUSTOMER CARE For service at any time, go to www.nordictrackservice.com.
  • Page 2: Table Of Contents

    If a decal is missing or illegible, see the front cover of this manual and request a free replacement decal. Apply the decal in the location shown. Note: The decal(s) may not be shown at actual size. NORDICTRACK is a registered trademark of ICON IP, Inc.
  • Page 3: Important Precautions

    To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your elliptical before using your elliptical. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product.
  • Page 5 STANDARD SERVICE PLANS...
  • Page 6: Before You Begin

    BEFORE YOU BEGIN Thank you for selecting the revolutionary reading this manual, please see the front cover of this NORDICTRACK ® AUDIOSTRIDER 990 PRO elliptical. manual. To help us assist you, note the product model The AUDIOSTRIDER 990 PRO elliptical provides an number and serial number before contacting us.
  • Page 7: Part Identification Chart

    PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly.
  • Page 8: Assembly

    ASSEMBLY •• Assembly requires two persons. •• In addition to the included tool(s), assembly requires the following tools: •• Place all parts in a cleared area and remove the one Phillips screwdriver packing materials. Do not dispose of the packing materials until you ...
  • Page 9 2. Remove and discard the shipping brackets (not shown) on the front and rear of the Frame (1). Identify the Front Right Stabilizer Tube (145), which has a Wheel (34) in the indicated location. While a second person lifts the front of the Frame (1), insert some packaging materials (not shown) under the Frame.
  • Page 10 4. Identify the Upright Cover (81). Orient the Upright Cover as shown, and slide it upward onto the Upright (4). Have a second person hold the Upright (4) and the Upright Cover (81) near the Frame (1). Connect the Upper Wire (152) to the Lower Wire (111).
  • Page 11 6. Identify the Right Upper Body Arm (61) and the Right Upper Body Leg (60) and orient them as shown. Attach the Right Upper Body Arm (61) to the Right Upper Body Leg (60) with three M8 x 43mm Bolts (96) and three M8 Jam Nuts (102). Make sure that the Jam Nuts are in the indi- cated hexagonal holes.
  • Page 12 8. While a second person lifts the back of the Right Pedal Plate (14), insert the Right Pedal Bracket (133) into the right Pedal Arm (44). Attach the Right Pedal Bracket (133) with an M10 x 20mm Screw (91) and an M10 x 25mm Washer (134).
  • Page 13 11. Apply grease to a Short Axle (149) and to two M8 x 22mm Washers (97). Next, tighten an M8 x 16mm Screw (82) and an M8 x 22mm Washer (97) a few turns into the Short Axle (149). While a second person holds the front end of the Right Link Arm (59) inside the bracket on the Right Upper Body Leg (60), insert the Short Axle (149) through both parts.
  • Page 14 13. Orient the Rear Console Cover (80) as shown. Attach the Rear Console Cover (80) to the Upright (4) with four M4 x 16mm Screws (101). 14. While a second person holds the Console (7) near the Upright (4), connect the wires on the Console to the Upper Wire (152) and to the Avoid pinching Right and Left Sensor Wires (108, 110).
  • Page 15 15. Attach the Front Console Cover (79) around the Upright (4) by pressing the tabs on the Front Console Cover into the Rear Console Cover (80). 16. See step 6. Tighten the six M8 x 43mm Bolts (96). See step 5. Tighten the eight M10 x 20mm Screws (91).
  • Page 16: The Chest Heart Rate Monitor

    THE CHEST HEART RATE MONITOR HOW TO PUT ON THE HEART RATE MONITOR •• Do not expose the heart rate monitor to direct sun- light for extended periods of time; do not expose it to The heart rate temperatures above 122° F (50° C) or below 14° F monitor consists of (-10°...
  • Page 17: How To Use The Elliptical

    HOW TO USE THE ELLIPTICAL HOW TO PLUG IN THE POWER CORD A temporary adapter may 2-pole Receptacle This product must be grounded. If it should malfunc- be used to tion or break down, grounding provides a path of least connect the Adapter resistance for electric current to reduce the risk of...
  • Page 18 HOW TO MOVE THE ELLIPTICAL HOW TO ADJUST THE POSITIONS OF THE PEDALS Due to the size and weight of the elliptical, moving Each pedal can it requires two persons. Stand in front of the elliptical, be adjusted to hold the upright, and place one foot against one of the several positions.
  • Page 19 HOW TO EXERCISE ON THE ELLIPTICAL To mount the elliptical, hold the upper body arms or the handlebars and step onto the pedal that is in the lowest Upper Body Arms position. Next, step onto the other pedal. Push the ped- als until they begin to move with a continuous motion.
  • Page 20 CONSOLE DIAGRAM FEATURES OF THE CONSOLE The advanced console offers an array of features designed to make your workouts more effective and enjoyable. When you use the manual mode of the console, you can change the resistance of the pedals and the incline of the ramp with the touch of a button.
  • Page 21 HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the elliptical has been exposed to 1. Begin pedaling or press any button on the cold temperatures, allow it to warm to room tem- console to turn on the console. perature before turning on the power.
  • Page 22 4. Follow your progress with the display. Stride——This display mode will show the total num- ber of strides you have pedaled. The display can show the following workout information: Time——When the manual mode is selected, this display mode will show the elapsed time. When a workout is selected, this display mode will show the time remaining in the workout.
  • Page 23 When a wireless iFit or two dashes will appear, and then your heart rate module is connected, will be shown. For the most accurate heart rate the wireless symbol at reading, hold the contacts for at least 15 seconds. the top of the display will show the strength If the display does not show your heart rate, make of your wireless signal.
  • Page 24 HOW TO USE A PRESET WORKOUT the profile will begin to flash. If a different resis- tance level, ramp incline level, and/or target rpm is 1. Begin pedaling or press any button on the programmed for the next segment, the resistance console to turn on the console.
  • Page 25 HOW TO USE AN IFIT WORKOUT of that type in your schedule. Press the Compete button to compete in a race that you have previ- You must have an iFit module to use an iFit workout. ously scheduled. For more information about the iFit workouts, please see www.iFit.com.
  • Page 26 HOW TO CHANGE CONSOLE SETTINGS appear in the display. Press the 1 Step Power Ramp increase and decrease buttons to adjust the The console features a user mode that allows you to contrast level. view usage information, select a unit of measurement, and adjust the contrast level of the display.
  • Page 27: Fcc Information

    FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 28: Maintenance And Troubleshooting

    MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the elliptical regularly. HOW TO ADJUST THE REED SWITCH Replace any worn parts immediately. If the console does not display correct feedback, the To clean the elliptical, use a damp cloth and a small reed switch should be adjusted.
  • Page 29 Locate the Reed Switch (38). Loosen, but do not remove, the two M4 x 12.7mm Flange Screws (161). Next, rotate the Large Pulley (19) until a Magnet (43) is aligned with the Reed Switch (38). Slide the Reed Switch slightly toward or away from the Magnet. Then, retighten the M4 x 12.7mm Flange Screws (161).
  • Page 30: Exercise Guidelines

    EXERCISE GUIDELINES Burning Fat——To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.
  • Page 31: Part List

    PART LIST Model No. NTEL09811.3 R1212B Key No. Qty. Description Key No. Qty. Description Frame Pedal Arm Roller Rear Stabilizer Tube Ramp Arm Roller Ramp Ramp Arm Upright 16mm Wave Washer M4 x 19mm Screw Axle Cover Front Left Stabilizer Tube Large Arm Bushing Console Large Bearing...
  • Page 32 Key No. Qty. Description Key No. Qty. Description M4 x 16mm Screw M10 x 45mm Bolt M8 Jam Nut M10 x 35mm Bolt M6 x 16mm Screw M10 Square Nut Power Switch Front Right Stabilizer Tube M10 Split Washer Right Track Shield Mount Right Ramp Cap M4 x 12mm TZP Screw...
  • Page 33: Exploded Drawing

    EXPLODED DRAWING A Model No. NTEL09811.3 R1212B...
  • Page 34 EXPLODED DRAWING B Model No. NTEL09811.3 R1212B...
  • Page 35 EXPLODED DRAWING C Model No. NTEL09811.3 R1212B...
  • Page 36: Ordering Replacement Parts

    ICON’’s option, the product through one of its authorized service centers. All repairs for which warranty claims are made must be preauthorized by ICON. If the product is shipped to a service center, freight charges to and from the service center will be the customer’’s responsibility. If replacement parts are shipped while the product is under warranty, the customer will be responsible for a minimal handling charge.

This manual is also suitable for:

Ntel09811.3

Table of Contents