Table of Contents
Advertisement
6. Identify the Left Pedal Arm (9). Insert the axle
on the Left Pedal Arm into the Left Adjustment
Leg (6).
Attach the Left Pedal Arm (9) with an M8 x
14mm Shoulder Screw (112), an Outer Pedal
Cover (133), and a Pedal Arm Washer (89).
Attach the Right Pedal Arm (132) to the Right
Leg (5) in the same way.
7. Rotate the Right Upper Body Arm (7) into the
vertical position.
Attach the Right Upper Body Arm (7) to the Right
Leg (5) with an M8 x 45mm Bolt (124) and an
M8 Locknut (123).
See the inset drawing. Tighten the M8 x 45mm
Bolt (124) that is preattached to the Right
Leg (5).
Tip: Avoid pinching the wires (not shown).
Slide the Right Leg Cover B (36) downward and
press it into place.
Repeat this step on the other side of the
elliptical.
All manuals and user guides at all-guides.com
6
7
10
5
132
9
89
133
6
112
124
8
123
60
6
5
124
Avoid pinching
the wires
7
36
Advertisement
Table of Contents
