Test Sequence - Honeywell Air Alert 96d User Manual

Test Sequence
When test sequence is selected from the main Tests menu, the con‐
troller will display the Test sequence screen.
If Esc is pressed on the keypad, the main Tests menu screen will be
displayed. However, to perform system tests, press any key to pro‐
ceed to the first test screen.
This screen tests each component individually and will advance only
to the next component when a key is pressed. This option will display
13 screens. Screens 1, 2, and 3 test Relays, BUZZER and LEDs.
The following six screens prompt the user to press the keypad but‐
tons, in turn: left, right, up, down, Silence, Enter and Esc. The system
will not advance until a key is pressed.
The system then moves to the Display test. When the blank screen is
displayed, it is testing for display pixels. Press any key to proceed to
the next step.
69