Table of Contents
Advertisement
Quick Links
034812 Motor, LT15 10Hp 3Ph
017957 Motor, LT15 10Hp 3Ph 575V
Safety is our #1 concern!
Used with
LT15E10H
LT15E10HW
LT15E10L
LT15E10L-ICE
LT15E10LW
LT15E10C
WARNING! Read and understand this
!
manual before using this machine.
E10 Motor
Safety, Operation, Maintenance
& Parts Manual
rev. A-B
rev. A-B
Form #1099
rev. E8.14
rev. A2.00
rev. E8.14
rev. E8.14
rev. A2.00
rev. E6.05
Advertisement
Table of Contents
Related Manuals for Wood-mizer E10
Summary of Contents for Wood-mizer E10
- Page 1 E10 Motor Safety, Operation, Maintenance & Parts Manual 034812 Motor, LT15 10Hp 3Ph rev. A-B 017957 Motor, LT15 10Hp 3Ph 575V rev. A-B Safety is our #1 concern! Form #1099 Used with LT15E10H rev. E8.14 LT15E10HW rev. A2.00 LT15E10L rev. E8.14 LT15E10L-ICE rev.
- Page 2 Active Patents assigned to Wood-Mizer, LLC Wood-Mizer, LLC has received patents that protect our inventions which are a result of a dedication to research, innovation, development, and design. Learn more at: woodmizer.com/patents ©2023 Wood-Mizer LLC Printed in the United States of America, all rights reserved. No part of this manual may be reproduced in any form by any...
-
Page 3: Table Of Contents
Table of Contents Section-Page SECTION 1 SAFETY Safety ..................... 1-1 SECTION 2 OPERATION Starting The Motor................. 2-1 SECTION 2 MAINTENANCE Safety ..................... 2-1 SECTION 3 REPLACEMENT PARTS Motor Starter Assembly ................ 3-1 Motor Assembly..................3-3 Throttle/Clutch Assembly ..............3-4 Table of Contents WM doc 12/5/23... -
Page 4: Safety
Safety SECTION 1 SAFETY This manual is provided as a supplement to the equipment manufacturer’s manuals. This manual provides information specific to the use of this equipment on the Wood-Mizer sawmill. Refer to the sawmill ® operator’s manual and manufacturer's manual before attempting to operate this equipment. -
Page 5: Operation
Operation Starting The Motor SECTION 2 OPERATION Starting The Motor DANGER! Ensure the blade is disengaged and all persons are out of the path of the blade before starting. Failure to do so will result in death or serious injury. Turn the main switch on the starter box to the ON position. -
Page 6: Replacement Parts
017955 MOTOR MODULE, 10HP 3-PHASE 380-500V ELECTRIC MOTOR Motor Parts () (See Section 4.4) 053713 Control Assembly, LT15 E10 3-Phase 240V 053738 Control Assembly, LT15 E10 3-Phase 460V F05006-5 Bolt, 5/16-18 x 3/4 Hex Head WM doc 12/5/23 Replacement Parts... - Page 7 Replacement Parts Motor Starter Assembly PART # DESCRIPTION COMMENTS QTY. 035991 Bracket, Front Electric Motor Mount 035992 Bracket, Rear Electric Motor Mount 053584 Enclosure, 16” x 16” x 8” Custom LT15E10L Electrical Components ( See Component List) LT15E10H Electrical Components ( See Component List) LT15E10S Electrical Components...
-
Page 8: Motor Assembly
Belt, Bx85 Drive 034904 Guard, Motor Shaft Lt15e F05007-7 Screw, 3/8-16 X 1 Hex Head F05011-3 Washer, 3/8 Flat Sae F05010-10 Nut, 3/8-16 Hex Nylon Lock S20097 Decal, Motor Direction 036058 Decal, E10 Electric Motor Wiring WM doc 12/5/23 Replacement Parts... -
Page 9: Throttle/Clutch Assembly
Replacement Parts Throttle/Clutch Assembly Throttle/Clutch Assembly PART # DESCRIPTION COMMENTS QTY. P04211 KNOB, 5/8-11 BALL 016487 HANDLE, LT15 CLUTCH 016486 BUSHING, 5/8 ID X 7/8 OD X 1 1/8 LONG FL BRONZE P05035 COLLAR, 5/8 ID LOCK 065572 BLOCK WELDMENT, LINKAGE CLUTCH/BRAKE PIN, 3/16 X 1 1/4 ROLL F05012-16 034605... - Page 10 Replacement Parts Throttle/Clutch Assembly PART # DESCRIPTION COMMENTS QTY. F05007-230 Bolt, 3/8-16 x 2-3/4” Hex Head Gr5 Full Thread F05011-3 Washer, 3/8 Flat F05010-25 Nut, 3/8-16 Swaged Lock 034810 Spring, Idler Arm LT15/D/E/G F05004-282 Screw, 10-24 x 5/8” FSHC 065872 Plate, Brake Adjustment F05011-18 Washer, #10 SAE Flat...
Need help?
Do you have a question about the E10 and is the answer not in the manual?
Questions and answers