Table of Contents
Advertisement
SETTING THE SLEEP TIMER
(Operating with only the remote control)
The sleep timer automatically turns the unit off after the specified
time passes.
1 Press the SLEEP button.
SLEEP @, @ and 60 @ are displayed.
SLEEP @ and © go out in 4 seconds, and the sleep timer starts
to work. The power is automatically turned off after 60 minutes.
If you wish to change this time, go to step 2 before SLEEP @
and © go out.
2 Press the << DOWN or >» UP button to specify
the time until the power is turned off.
Each time the button is pressed, the time changes between 10
and 240 minutes in 10-minute steps.
The specified time @ is displayed.
To check the time remaining until the power is turned off
Press the SLEEP button once. The remaining time is displayed for
4 seconds.
To cancel the sieep timer mode
Press the SLEEP button twice so that SLEEP in the display goes
out.
Advertisement
Table of Contents
