Table of Contents
Advertisement
4
H44DOWN
UP PPI
5
54
REC/REC MUTE
RECORDING
Al EDIT RECORDING
The Al EDIT function lets you record CD without worrying about
tape lengths and track lengths. When you insert a CD, the unit
automatically calculates track lengths. If necessary, it rearranges
the order of tracks, so that no track is cut short.
—
Insert the tape to be recorded on into deck 2 and set
the Dolby NR.
See steps 1 and 2 on page 52 "RECORDING FROM A CD".
nN
Press the CD button and load a disc onto the tray.
wo
Press the EDIT/REMAIN button once.
EDIT lights and Al flashes in the display.
Each time it is pressed, the display changes.
ae EDIT —~+ PRGM sae
4 Press the << DOWN or» UP button to designate
the tape length.
Enter a length from 10 to 99 minutes.
In a few seconds, the microcomputer decides which tracks to
record on each side of the tape.
When using the remote control
Press the numeric buttons.
Example:
When using a 46-minute tape, press the 4 and 6 buttons.
(@) When using a 60-minute tape, press the 6 and 0 buttons.
@ Tape length
@ Tape side
A: Front side/B: Back side
@ Selected tracks
5 Press the @ REC/REC MUTE button to start record-
ing.
The tape is rewound to the beginning of the front side, plays
through the leader for 10 seconds, and then recording starts.
After recording on the front side (side A) ends, recording on the
back side (side B) starts.
When you use the remote control to start recording, first press
the @/O REC/REC MUTE button and then press the 4 > button
within 2 seconds.
To stop recording in the middle of the program
Press the I button.
Recording and CD piay stop simultaneously.
Recording is inhibited if the erasure prevention tab foreither side
of the tape is broken off.
¢ The Al EDIT function cannot be used with discs cortaining 31
tracks or more.
Advertisement
Table of Contents
