Table of Contents
Advertisement
OPERATION
Changing Temperature Unit of Measure
and Belt Direction
Use the following procedure to change the temperature unit
of measure between Fahrenheit and Celsius, as well as
the direction that the conveyor belt moves. This procedure
requires access to password-protected screens and should be
performed by authorized personnel only.
1. From the Select Desired Item screen, touch the "up" arrow.
• A password keypad will appear on the touchscreen.
2. Input the password using the keypad, and touch ENTER.
• The Admin Mode screen will appear on the touchscreen.
3. Touch MAINT to access the Maintenance Mode screen.
Touch to access
Sound Settings
screen.
Touch to access
Diagonostics Mode
screen.
Maintenance Mode Screen
4. Touch CONFIG on the Maintenance Mode screen. The
Oven Configuration screen appears.
5. Touch TEMP MODE on the Oven Configuration screen
to toggle the unit of measure between Fahrenheit and
Celsius.
Touch to toggle between
fahrenheit and celcius.
Touch to return to Maintenance Mode screen.
Touch to toggle the direction of the conveyor belt
between left-to-right and right-to-left. After returning
to the Main Recipes screen and shutting down/
disconnecting power/restarting the oven, the
conveyor belt will move in the selected direction.
Oven Configuration Screen
Touch to access
Set Time/Date
screen.
Touch to access
Oven Configuration
screen.
Touch to return to
Admin Mode screen.
Uploading from a USB Drive
Use the following procedure to upload pre-programmed menu
items or firmware updates from an external USB drive. This
procedure requires access to password-protected screens and
should be performed at oven startup by authorized personnel
only.
1. Push the Standby button to turn on the unit.
• The touchscreen will energize. After the Startup Screen,
the Select Desired Item screen appears.
2. Remove the cover from the USB port below the Standby
button, and insert the USB drive into the port.
3. From the Select Desired Item screen, touch the "up" arrow.
• A password keypad will appear on the touchscreen.
4. Input the password using the keypad, and touch ENTER.
• The Admin Mode screen will appear on the touchscreen.
5. Touch USB to access the USB Functions screen.
Touch to upload
touchscreen
firmware update.
Touch to upload
relay firmware
update.
USB Functions Screen
6. Touch the desired function to begin the corresponding
upload.
• Select the upload file from the list that appears.
• A screen will appear to indicate that the upload is in
progress.
• When the upload is complete, the oven will restart.
7. When the startup screens reappear, remove the USB drive
from the USB port, and replace the port cover.
8. Perform the normal "Startup" procedure at the beginning of
this section to use the oven.
12
Touch to upload
pre-programmed
menu items.
OVCM-1123
Advertisement
Table of Contents
