Programming Conveyor Settings - Hatco OVENTION C1400 Installation And Operating Manual

Programming Conveyor Settings

Use the following procedure to edit or create conveyor settings.
This procedure requires access to password-protected screens
and should be performed by authorized personnel only.
NOTE: The USB port allows the uploading of pre-programmed
conveyor settings from an external USB drive. Refer
to the "Uploading from a USB Drive" procedure in this
section for details.
1. From the Select Desired Item screen, touch the "up" arrow.
• A password keypad will appear on the touchscreen.
2. Input the password using the keypad, and touch ENTER.
• The Admin Mode screen will appear on the touchscreen.
Touch to return to
Select Desired Item
screen.
465 F 465 F
Back
Maint
Touch to access
USB Functions
screen.
Touch to access
Maintenance Mode
screen.
Admin Mode Screen
3. Touch RECIPES to access the Recipe Development
screen.
a. The Recipe Development screen will appear. This
screen will look like the Select Desired Item screen.
Touch an existing conveyor
setting to edit.
Touch to scroll to next screen and view
additional conveyor settings or select empty
box to create a new conveyor setting.
Touch to return to Admin Mode screen.
Recipe Development Screen—Single Belt Model
OVCM-1123
Touch to access
Recipe Development
screen.
ADMIN MODE ADMIN MODE
Recipes
USB Logs
Touch to access
Logs Detail
screen.
4. Edit or create a conveyor setting.
• To edit an existing conveyor setting, touch the desired
setting.
• To create a new conveyor setting, touch an empty box.
If no empty boxes are available, touch the "down" arrow
to scroll to the next screen.
• The Edit Preset Data screen will appear.
Single Belt
Touch to save settings and return to
Recipe Development screen.
Edit Preset Data Screens
5. Touch each "setting" box on the Edit Preset Data screen
to edit the corresponding setting. Common settings
include item name, top blower percentage, bottom blower
percentage, and cook temperature. For cook duration:
single belt models will have a single COOK DURATION
box; split belt models will have a FRONT BELT box and a
BACK BELT box.
• Touching a "setting" box will bring up a keypad specific
to the setting. Enter the desired value using the keypad,
then touch ENTER to return to the Edit Recipe Settings
screen.
• Menu item names can have up to 16 characters.
6. When conveyor setting programming is complete, touch
SAVE AND EXIT on the Edit Preset Data screen.
• The Recipe Development screen will appear.
• To program additional menu items, repeat steps 4 and 5
of this procedure.
7. If all programming is complete, touch the "up" arrow on the
first (screen 1 of 9) Recipe Development screen to return
to the Admin Mode screen.
11
OPERATION
Touch to exit without
saving and return to
Recipe Development
screen.
Split Belt