Table of Contents
Advertisement
®
R&S
QPS Walk2000
1 Safety and regulatory information
The product documentation helps you use the product safely and efficiently. Follow the
instructions provided here and in the following chapters.
Intended use
The R&S QPS Walk2000 is a millimeter-wave security scanner designed to screen
people at security checkpoints. The system automatically detects metallic and
non‑metallic objects of all types concealed inside or beneath clothing. Use the product
only for its designated purpose. Observe the operating conditions and performance
limits stated in the data sheet.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential dan-
gers and gives instructions on how to prevent personal injury or damage caused by
dangerous situations. Safety information is provided as follows:
●
In
ded in many languages as printed safety instructions. The printed safety instruc-
tions are delivered with the product.
●
Throughout the documentation, safety instructions are provided when you need to
take care during setup or operation.
1.1 Safety instructions
Products from the Rohde & Schwarz group of companies are manufactured according
to the highest technical standards. To use the products safely, follow the instructions
provided here and in the product documentation. Keep the product documentation
nearby and offer it to other users.
Use the product only for its intended use and within its performance limits. Intended
use and limits are described in the product documentation such as the data sheet,
manuals and the printed "Safety Instructions". If you are unsure about the appropriate
use, contact Rohde & Schwarz customer service.
Using the product requires specialists or specially trained personnel. These users also
need sound knowledge of at least one of the languages in which the user interfaces
and the product documentation are available.
Never open the casing of the product. Only service personnel authorized by
Rohde & Schwarz are allowed to repair the product. If any part of the product is dam-
aged or broken, stop using the product. Contact Rohde & Schwarz customer service at
http://www.customersupport.rohde-schwarz.com.
Lifting, carrying and installing the scanner
Installation, setup and disassembly must be performed by trained personnel. Install the
R&S QPS Walk2000 exactly as described in the installation manual. During the instal-
Getting Started 1179.5782.02 ─ 03
Chapter 1.1, "Safety
instructions",
Safety and regulatory information
on page 5. The same information is provi-
Safety instructions
5
Advertisement
Table of Contents
