Transport; Disposal - R&S QPS Walk2000 Getting Started

®
R&S QPS Walk2000
We recommend to use the original packaging to store the R&S QPS Walk2000. If the
original packaging is not available, use sufficient padding to prevent the scanner from
moving around inside the box.

6.5 Transport

Lifting and carrying
See
Packing
Use the original packaging material designed for the R&S QPS Walk2000.
If you do not have the original packaging, use similar materials that provide the same
level of protection.
Securing
When moving the R&S QPS Walk2000 in a vehicle or using transporting equipment,
make sure that the R&S QPS Walk2000 is properly secured. Only use items intended
for securing objects.
Transport altitude
The maximum transport altitude without pressure compensation is 4500 m above sea
level.

6.6 Disposal

Rohde & Schwarz is committed to making careful, ecologically sound use of natural
resources and minimizing the environmental footprint of our products. Help us by dis-
posing of waste in a way that causes minimum environmental impact.
Disposing electrical and electronic equipment
A product that is labeled as follows cannot be disposed of in normal household waste
after it has come to the end of its service life. Even disposal via the municipal collection
points for waste electrical and electronic equipment is not permitted.
Figure 6-1: Labeling in line with EU directive WEEE
Rohde & Schwarz has developed a disposal concept for the eco-friendly disposal or
recycling of waste material. As a manufacturer, Rohde & Schwarz completely fulfills its
Getting Started 1179.5782.02 ─ 03
"Lifting, carrying and installing the scanner" on page 5.
Maintenance
Disposal
25