Table of Contents
Advertisement
www.ti.com
2.4 Headers and Connectors (Hardware Device Variant)
Figure 2-8
shows all configuration jumpers for the DRV824xH-Q1 hardware variant. DRV814xH-Q1 features
the same jumpers, with the exception of MODE. Each LVL silkscreen label directly corresponds to the data
sheet description. Changing the jumper within MODE allows the user to use the driver in PH/EN, PWM, and
Independent Half-Bridge mode. Please refer to the device data sheet for more information regarding pin LVL
settings and associated configuration.
IPROPI is common to both hardware and SPI EVM/ device variants and performs the same function.
Figure 2-8. DRV824x and DRV814x Hardware Variant Configuration Jumpers
2.5 Headers and Connectors (SPI variant)
The and DRV824xS-Q1 and DRV814xS-Q1 SPI device variants omit all headers associated with the hardware
variant described in the previous section.
SLVUC46D – MARCH 2021 – REVISED NOVEMBER 2023
Submit Document Feedback
Note
Copyright © 2023 Texas Instruments Incorporated
Evaluation Hardware Overview
DRV824x_DRV814x-Q1EVM User's Guide
13
Advertisement
Table of Contents
