Panasonic Omnivision PV-V4620 Operating Instructions Manual page 9

L .. L
I
Multi Function Display
r
[_Check list before you begin,
[] All connections are made.
[] TV is turnedon andtuned to CH3, 4 or Video.
[] Cassette recordtab is in place.
[] Remotein VCR mode.
1 _ / Insert a cassette"
• VCR power comes on and "VCR"
tRecord tab_ ]
appears on Multi Function Display.
2I (E_) Q Q
C_ Cz)Or CH
Select Channel.
PressCH • / T* or NUMBERED keys.
• To setect _LtNE,"see page 11.
• To select channels over 100,
first press 100 key, then enter
remaining two digits.
O EJECT LIGHT
Q@®
Q®®
G:) (Z) _
_(_) (3D QD
A0C_
VCR_V
--STOP
PAUSE/
/ SLOW
-3SPEED
-4
REC
I SPEED
O
4
After the VCR has been in Pause mode
for 5 minutes, it will stop automatically
to protect the tape and the video head.
This video recorder, equipped with the HQ (High 1
Quatity) System, is compatible with existing VHS /
equipment. Only use those tapes with the _ /
mark. It is recommended that only cassette tapes /
that have been tested and inspected for use in 2, /
4, 6, and 8 hour VCR machines be used. j
Select Recording speed.
(See page 40.)
Press SPEED.
• SP = Standard Play
LP = Long Play
SLP = Super Long Play
• Selected speed is displayed on TV
screen and Multi Function Display.
Start Recording.
(_ Press REC.
• To edit out unwanted portions,
press PAUSE/SLOW to pause
and to resume recording.
• To stop --> Press STOP
• One Touch Recording
Press REC repeatedly to set the recording length
(30 rain. - 4 hours).
• The VCR turns itself off at a preset time.
• Record One Program While Watching Another
Press VCW'('V-> "VCR" disappears on Multi Function Display
--> Select Channel at the TV.
• Selecting Channel at the VCR
Press VCR/TV--> "VCR" appears on Multi Function Display
--> Select Channel at the VCR (applies to connection b)
only, see page 4),
F Record using VCR controls
setect 1
Insert
4sta rt
Channel. VCR/TV a cassette. Recording.
• Press to stop. j
9