Panasonic Omnivision PV-V4620 Operating Instructions Manual page 31

When set to proper audio mode VCR can:
1) record/playback MTS stereo broadcasts (main language) in Hi-Fi stereo.
2) record/playback mono (main language) or SAP (sub language) broadcasts.
3) playback non Hi-Fi tapes in monaural.
• The selected broadcast sound is always recorded on left and right Hi-Fi track as well as the normal monaural
track. This means tapes can be played back on Hi-Fi and non-Hi-Fi VCRs.
SAP/Hi-Fi Display audio mode.
Q Press SAP/Hi-Fi.
L
2
_STEREO
_SAP •
MONO
• Arrow indicates selection.
Select desired mode.
Press SAP/Hi-Fi
SAP/Hi-Fi repeatedly (each
press within 5
seconds).
• Refer to the "Receivable
Broadcast Types" on page 30.
Do a recording.
See page 9.
a Start playback.
See page 8.
EJECT UGHT
@@®
_CD_
0 C_D 0
P_ _ASKIP _ED S_RCH_
_) 0 0 0-_
SAP/
Hi-Fi
2
6
6
b[ Display audio mode.
SAP/Hi'Fi
Press SAP/Hi-Fi.
C
HIFI (L/R),
HIFI(L)
HIFI(R)
NORMAL
Arrow indicates selection.
Select desired mode.
• ! Press SAP/Hi-Fi
SAP/Hi-Fi I repeatedly (each
press within 5
seconds).
• Select "HIFI(L/R)" or "HIFI(L)" or
"HIFI(R)" to listen to stereo
recordings in stereo sound.
Select "NORMAL" for monaural
sound.
• Only tapes recorded in Hi-Fi stereo
will play back with true stereo sound.
Standard stereo tapes will playback
in monaural sound.
• To listen to Hi-Fi stereo playback, the
VCR AUDIO (L/R) jacks must be
connected to a stereo TV or an
external stereo amp and speakers.
(See page 30.)
• If tracking is adjusted during playback,
Hi-Fi audio may revert to normal
audio.
• Hi-Fi and normal audio playback
volume level may differ.
31