Panasonic Omnivision PV-V4620 Operating Instructions Manual page 6

When VCR is turned on the first time,
setup mode is entered automatically.
1 O
Process of Setup
SELECT LANGUAGE
PUSH CH • ENGLISH
OPRIMIR CH • ESPANOL
APP. VCR/TV FRAN_AIS
TO CHANGE VCR'S OUTPUT
CH, PUSH ACTION KEY,
,4 Press ACTION
IF YOU PUSH ACTION KEY,
% UTeUT c. SW,,OHES
:i, Press ACTION
PLEASE 4. TO l CH TUNE YOUR TV
_ After 3 seconds
Turn the TV and VCR on.
Press POWER*.
Set TV Channel to CH 3.
• If using AV Cable connection, set TV
to Video instead of channel. (See
connection a) on page 4.)
"Display SELECT LANGUAGE.
This display appears for first time setup
only.
Select the language.
for English
i
CH
O-- for Spanish
_ (ESPANOL)
2,z._.aO---_ for French
(FRAN_AIS)
When using connection b) (see
page 4), tune TV to VCR's output
channel.
If there is beat or noise on CH3,
change VCR's output channel to CH4
by pressing ACTION twice.
• Always tune TV to this channel to monitor the VCR.
• If you used audio/video jack connection, tune the TV to its video input.
• If wrong language is set, do "Reset All VCR Memory Functions"
steps on page 40.
VCRbCABLE / DSS BOXI_TV
VCRI-TV
SELECT:•• KEY
SET :_ KEY
END :ACTION KEY
Select hookup.
r 1) Press AY
to select,
2) Press •
to set.
• If you selected "CABLE/DSS
BOX • VCR • TV," continue with
step 4 and only the cable box
output channel will be placed in
memory.
If not, go to step 6.
3
SELECT HOOKUP
CABLE/DSS BOXPVCRPTV
CABLE/DSS BOX OUTPUT1
SELECT:• • KEY
SET :< • KEY
END :ACTION KEY
Select cable box
or DSS receiver
output channel.
- 1) Press A_!'
to select•
2) Press •
to enter.
• If necessary, refer to cable box manual.
• If you used Audio/Video jack connection to cable box, set "VIDEO OUT".
4
Turn on cable box and set it to PBS
channel in your time zone.
• If you use DSS receiver, it must be turned off.
EJECT
@@®
CD_
AD_DLT
O C22) O
1
POWER
2
VCR/TV
0 SELECT/
_ ,OSET
£_. • :PLAY
• :STOP
•:FF
'-2
ACTION
2CH',/•