Panasonic Omnivision PV-V4620 Operating Instructions Manual page 7

6
CHANNEL/CLOCK AUTO S ET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX, TUNE IT TO YOUR
LOCAL PBS CH THEN
PLEASE PUSH CH UP KEY
Start Channel Auto Set
and Clock Auto Set.
(_ I Press CH A.
CH _
CH AUTO SET PROCEEDING J
I AUTO CLOCK SET
PROCEEDING
r
i Case1 ;
\ _J
(Setup completed)
r .....
CarCase 2 j:
IMPORTANT NOTE FOR
AUTO CLOCK SET
• Auto clock set is performed the
first time the VCR is turned off
each day. If used, a cable box
must be left on and tuned to the
PBS channel at the time VCR
power is turned off if you want auto
clock set to be done,
• If used, a DSS receiver must be
turned off for auto clock set.
• If Cable Box or DSS receiver is
connected to VCR via Audio/Video
jacks, an RF coaxial cable must
also be connected for auto clock
set and channel auto set features
to work.
(Setup incomplete)
1/4/2000TUE 12:00PM
DST:ON
SETTING : CH 02
AUTO CLOCK SET
COMPLETED
END : PUSHCH UP KEY
CH
Press CH •
to exit.
AUTO CLOCK SET
IS INCOMPLETE
PUSH ACTION TO SET CLOCK
SET CLOCK
DST:ON
SELECT:A • KEY
SET :• KEY
END :ACTION KEY
SET CLOCK
DST:ON
Clock Setup incomplete.
Set the clock manually.
1) Press ACTION.
• If your area observes DST (daylight
saving time), but the time is incorrect; do
the "Time Zone Adjust" steps on page 39.
f
EJECT LIGH_
SELECT/
@ @ _ SET
__ • :PLAY
-- • :STOP
• :nEW
ACTION
o CCD C)
SL_ M_ S_p
SET :4 • KEY
START :ACTION KEY
2) Press••to
select month.
3) Press•to set.
• Likewise, set date, year, time,
DST (Daylight Saving Time).
To Make Corrections,
repeatedly press • • to move to
error, then correct.
] 4) Press ACTION.
_J_
I
(Clock starts.)
I _ i. To ext this
I 1
mode, press
L._+ _ ACTION again.
O
• VCR calendar is accurately maintained to
Dec. 31, 2096 11:59PM.
• Channel auto set selects normal TV or Cable
channels depending on your VCR hookup.
• To reset Language, Channels, Clock or
VCR's Output Channel see pages 38 and 39.
-- Using AY'< • keys
You can also operate the menu
screen using VCR buttons.
When menu screens are
displayed, the PLAY, STOP,
REWIND, and FF buttons on
the VCR and remote function I
as ••• • only with no tape I On Remote
inserted.
To display menu using VCR
buttons, press CH • and CH
• together.
On VCR
• :PLAY •:nEW
• :STOP •:FF
To exit the menu, repeat above.
'7