Table of Contents
Advertisement
703
702
WARNING!
BIOLOGICAL AND
POISON HAZARD!
Use personal protection
when handling coolant.
Immediately clean up
spills.
701
REF PART #
DESCRIPTION
701
P0757Z701 ELECTRICITY LABEL
702
P0757Z702 BIOHAZARD WARNING LABEL
703
P0757Z703 DISCONNECT WARNING LABEL
704
P0757Z704 GRIZZLY OBLONG NAMEPLATE-SMALL
705
P0757Z705 MACHINE ID LABEL
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
-82-
Labels & Cosmetics
705
704
MODEL G0757Z
V.S. HORIZONTAL/
VERTICAL MILL
Specifications
Power Requirement: 220V, 1-Ph, 15A, 70 Hz
Vertical Spindle Motor: 3 HP, 220V, 3-Ph, 9.3A
Horiz. Spindle Motor: 2 HP, 220V, 1-Ph, 8.7A
Table Travel: Cross 8-1/2", Long. 23-1/2"
Knee Travel: 12-1/2"
Vertical Spindle to Column Distance: 27-3/4"
Manufactured for Grizzly in China
Max. Dist. Vertical Spindle to Table: 14-1/2"
Horizontal Spindle to Table Distance: 14-1/8"
Vertical Spindle Travel: 5"
Headstock Tilt: 90° Left/Right
Headstock Rotation Around Column: 180°
Spindle Tapers: R-8
Weight: 1874 lbs.
WARNING!
To reduce the risk of serious personal injury when using this machine:
1. Read and understand owner's manual before operating.
2. Always wear approved safety glasses AND a face shield.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up, adjusting, or servicing.
5. Avoid getting entangled in moving parts—tie back long hair, roll up long
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
7. Properly set up machine before starting.
7. Always remove adjustment tools before starting.
8. Keep all guards and covers in place during operation.
9. Never use hands to secure workpiece to table during operation—use
clamps or a vise.
10. Avoid positioning hands where they could slip into rotating bits or
tooling if workpiece unexpectedly shifts or you get distracted.
11. Always use a brush or vacuum to remove metal chips; DO NOT use your
hands, rags, or compressed air.
12. Never attempt to slow or stop spindle with hands or tools.
13. Always use proper feeds and speeds for operation and workpiece.
14. Never leave machine running unattended.
15. DO NOT operate when tired or under influence of drugs or alcohol.
17. DO NOT expose to rain or use in wet locations.
17. Prevent unauthorized use by children or untrained users; restrict access
or disable machine when unattended.
READ and UNDERSTAND
instruction manual to
avoid serious injury. If a
manual is not available,
DO NOT use machine. Go
to www.grizzly.com or call
(800) 523-4777.
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
707
701
709
grizzly.com
706
G0757Z
Date
S/N
EYE/FACE INJURY
HAZARD!
Always wear
ANSI-approved safety
glasses and face
shield when using this
machine.
708
REF PART #
DESCRIPTION
706
P0757Z706 MODEL NUMBER LABEL
707
P0757Z707 GRIZZLY GREEN TOUCH-UP PAINT
708
P0757Z708 GRIZZLY PUTTY TOUCH-UP PAINT
709
P0757Z709 GRIZZLY.COM LABEL
Model G0757Z (Mfd. Since 02/15)
703
Advertisement
Table of Contents
