Advertisement
Troubleshooting
Do not repair or disassemble the unit by yourself, unauthorized repair attempts will invalidate
the warranty and may cause bodily harm.
Issue
No power
No dust elimination
Water tank does not move
Odour emission from unit
If the above solutions do not resolve the problem please contact the service centre.
Possible Reason
1. Power cord is unconnected
2. Honeycomb filter support is not
installed correctly
3. The master switch is not turned
on.
4. The power knob is not in the ON
position
1. The honeycomb filter is blocked.
2. The air inlet is blocked
The pump supporter is loosened
and blocks the water tank.
1. New unit. When the unit is used
for the first time, the Honeycomb
cooling media will have an odour,
which will dissipate within a week
of use
2. Honeycomb filter may have
developed mold or bacterial growth
Page 8 of 10
Solution
1. Connect the power cord
2. Install the honeycomb filter
correctly.
3. Turn on the master switch
4. Turn the power knob to the
on position.
1. Remove the honeycomb
filter and clean it.
2. Remove the obstruction
Reset the pump supporter.
1. No action required
2. Clean the filter pads with
mild antibacterial solution.
Dry before use.
Advertisement
