Downlink Command - IME VS133-868M User Manual

0f e3 (Region Monitoring)
10 e4 (Region Monitoring)
Note: If children distinction feature or staff detection feature is enabled, the counter uplinks will
minus children and staff. For example, if children distinction is enabled, the accumulated in
counter=total in counter-children in, the accumulated out counter=total out counter-children out.
Example:
1. Device information
ff0101 ff166600b09409760000 ff090102 ff1f85010001
Channel Type
01
ff (Protocol
Version)
Channel Type
09
ff (Hardware
version)
2. Line 1 People counter
Channel Type
d2
03 (accumulated
in counter)
Channel Type
cc (Periodic
05
Counter)

7.2 Downlink Command

VS133 supports to configure the device via downlink commands. Application port is 85 by
Byte 1-2: in counter during the report interval
Byte 3-4: out counter during the report interval
Byte 1: number of people in region 1
Byte 2: number of people in region 2
Byte 3: number of people in region 3
Byte 4: number of people in region 4
Byte 1: region ID
Byte 2-3: avg. dwell time
Byte 4-5: max. dwell time
Value
01 (V1)
Value
0102 (V1.2)
03d205000000 04d203000000 05cc02000100
Value
05 00 00 00 =>
00 00 00 05=5
Value
In: 02 00 => 00
02 = 2
Out: 01 00 => 00
01 =1
Channel Type
16(Device
ff
SN)
Channel Type
1f (Software
ff
version)
Channel Type
d2
04 (accumulated
out counter)
Value
66 00 b0 94
09 76 00 00
Value
85 01 00 01
(V133.1.0.1)
Value
03 00 00 00
=> 00 00 00
03=3
30