Table of Contents
Advertisement
Draw Detection Lines
Users can draw detection lines to record the people count values which indicate the number of
people enter or exit.
Step 1: Click Draw Detection Lines.
Step 2: Left-click to start drawing and drag the mouse to draw a line, left-click again to continue
drawing a different direction edge and right-click the mouse to complete the drawing. The line
can be dragged to adjust the location and length. One device supports at most 4 broken lines
with maximum 4 segments each.
Step 3: If users need to delete the line, click Draw Detection Lines and select the line which need
to be deleted, then click Clear This Line or click Clear All.
Note:
1) The arrow direction of the detection line depends on your drawing direction. If users need to
flip the line, select the line which need to be flipped and click Flip Arrow Direction. And users can
click Flip All to flip all detection lines.
10
Advertisement
Table of Contents
