Report - IME VS133-868M User Manual

Number of When rejoin mode is enabled, set the number of detection.
Detection Note:
LoRaWAN ®
V1.0.2, V1.0.3 are available.
Version
Region Frequency plan of this device.
RX2 Data Rate RX2 data rate to receive downlinks.
RX2 Frequency RX2 frequency to receive downlinks.
Spreading Factor If ADR is disabled, the device will send data via this spreading factor.
Select the channel from channel list or enter the index to select the
frequency channel.
Index examples:
1, 40: Enabling Channel 1 and Channel 40
Channel
1-40: Enabling Channel 1 to Channel 40
1-40, 60: Enabling Channel 1 to Channel 40 and Channel 60
All: Enabling all channels
Null: Indicates that all channels are disabled
If the device does not receive ACK packet from network server, it will
Confirm Mode
resend data once.
ADR Allow network server to adjust data rate of the device.
Note:
1) Please contact sales for device EUI list if there are many units.
2) Please contact sales if you need random App keys before purchase.
3) Only OTAA mode supports rejoin mode.
4) Select OTAA mode when you connect device to Milesight IoT Cloud.

5.4 Report

VS133 supports to generate visual line chart or bar chart to display the people traffic and
supports to export the report. Before using this feature,
System page.
the actual sending number is Number of Detection + 1.
ensure that the device time is correct on
17