Table of Contents
Advertisement
Reset to Factory
Press and hold the reset button for more than 10
Default
seconds.
2.4 Dimensions (mm)
3. Power Supply
VS133 can be powered by power adapter (12VDC, 2A).
4. Access the Sensor
VS133 provides user-friendly web GUI for configuration and users can access it via Wi-Fi
connection. The recommended browsers are Chrome and Microsoft Edge. The default IP of
Wi-Fi is 192.168.1.1, and default SSID is People Counter_XXXXXX (can be found on the label).
Step 1: Power on the device.
Step 2: Enable the Wireless Network Connection on your computer and search for corresponding
access point, then connect computer to this access point.
Step 3: Open the Browser and type 192.168.1.1 to access the web GUI.
Step 4: Select the language.
Step 5: Users need to set the password and three security questions when using the sensor for
the first time (three questions can be skipped by refreshing webpage). After configuration, log in
with username (admin) and custom password.
Note:
1) Password must be 8 to 16 characters long, which contains at least two kinds or more in
combination with numbers, lowercase letters, uppercase letters and special characters .
2) You can click the "forgot password" in login page to reset the password by answering three
Wi-Fi off: Green on
Green Blinks.
7
Advertisement
Table of Contents
