Table of Contents
Advertisement
Safety Precautions
Milesight will not shoulder responsibility for any loss or damage resulting from not following the
instructions of this operating guide.
Though the device is compliant with Class 1 (IEC/EN 60825-1:2014), please
the ToF sensor too close and directly.
The device must not be disassembled or remodeled in any way.
To avoid risk of fire and electric shock, do keep the product away from rain and moisture
before installation.
Do not place the device where the temperature is below/above the operating range.
Do not touch the device directly to avoid the scalds when the device is running.
The device must never be subjected to shocks or impacts.
Make sure the device is firmly fixed when installing.
Do not expose the device to where laser beam equipment is used.
Use a soft, dry cloth to clean the lens of the device.
Declaration of Conformity
VS133 is in conformity with the essential requirements and other relevant provisions of the CE,
FCC, and RoHS.
Copyright © 2011-2023 Milesight. All rights reserved.
All information in this guide is protected by copyright law. Whereby, no organization or individual
shall copy or reproduce the whole or part of this user guide by any means without written
authorization from Xiamen Milesight IoT Co., Ltd.
For assistance, please contact
Milesight technical support:
Email:
iot.support@milesight.com
Support Portal:
support.milesight-iot.com
Tel: 86-592-5085280
Fax: 86-592-5023065
Address: Building C09, Software Park
Phase III, Xiamen 361024,
China
DO NOT
look at
2
Advertisement
Table of Contents
