Qsan Technology XCubeSAN XS5224D Hardware Manual page 136

2. You must use terminal software such as HyperTerminal or Putty to open the console
after the connection is made.
3. Here we first demonstrate HyperTerminal. The console settings are on the following.
Baud rate: 115200, 8 data bit, no parity, 1 stop bit, and no flow control
Terminal type: vt100
116 ©
Copyright 2021 QSAN Technology, Inc. All Right Reserved.
INFORMATION:
For more information about terminal software, please refer to
HyperTerminal: http://www.hilgraeve.com/hyperterminal/
PuTTY: http://www.putty.org/