Operation - Snom HD101W User Manual

Operation

SIP Cordless 1-line Hotel
HD101
SIP Cordless 1-line Wi-Fi Enabled Hotel
Telephone - HD101W
SIP Cordless 1-line Handset - HD1
Handset
Using the cordless handset and the
telephone base
The cordless handset and the telephone base
cannot be used on the same call. However, calls
can be switched between the cordless handset
and the telephone base speakerphone.
When the cordless handset or the telephone
base is in use, the FLASH/TALK key on the
cordless handset and the MESSAGE WAITING
LED on the telephone base illuminate.
Receive a call
When there is an incoming call, the telephone
rings and the MESSAGE WAITING LED flashes.
Answer a call using the cordless handset
while it is not on the telephone base or
charging stand
On the cordless handset, press FLASH/TALK or
/SPEAKER.
• The FLASH/TALK key illuminates when in
/SPEAKER
use. The
in speakerphone mode.
Answer a call using the cordless handset
while it is cradled on the telephone base
or charging stand
Lift the cordless handset from the telephone
base or charging stand.
• The FLASH/TALK key illuminates when in
use. The /SPEAKER
in speakerphone mode.
Telephone -
key illuminates when
key illuminates when
Answer a call using the telephone base
On the telephone base, press
• The MESSAGE WAITING LED and the
SPEAKER
key illuminate when in use.
Place a call
Place a call using the cordless handset
On the cordless handset, press FLASH/TALK
/SPEAKER. Listen for a dial tone and then
or
dial the desired number, or press a Speed
Dial key on the cordless handset to dial a
programmed number.
• The FLASH/TALK key illuminates when in
use. The
in speakerphone mode.
Place a call using the telephone base
On the telephone base, press
Listen for a dial tone and then dial the desired
number, or press a Speed Dial key on the
telephone base to dial a programmed number.
• The MESSAGE WAITING LED and the
SPEAKER key illuminate when in use.
End a call
End a call when using the cordless handset
Press OFF on the cordless handset or place it
in the telephone base or charging stand. The
call ends when all handsets hang up.
End a call when using the telephone base
Press /SPEAKER.
Switch a call between the cordless
handset and the telephone base
speakerphone
• To switch a call from the cordless handset
to the telephone base speakerphone, press
/SPEAKER
EN - 16
/SPEAKER.
/SPEAKER
key illuminates when
on the telephone base.
/
/SPEAKER.
/