Snom HD101W User Manual page 13

Handset registration
Place the cordless handset on the telephone
base cradle. Handset registration happens
automatically the first time a cordless handset is
placed on the telephone base.
When the registration process completes, the
MESSAGE WAITING LED flashes once and you
hear 3 rising beeps as confirmation.
Each telephone base accommodates up to
4 cordless handsets. When you already have
4 registered handsets, you can replace one
of them by a new handset if any one of the 4
registered handsets is disconnected from the
base. For example, it is out of range, or its battery
is removed or depleted. The previous registered
handset is then deregistered from the telephone
base.
Handset deregistration
When a registered cordless handset is idle, press
*331734#, then press HOLD and *883247#. You
hear a confirmation tone when the deregistration
process completes.
Register a handset to another
telephone base
Any contemporary cordless 1-line handset can
register to any contemporary cordless 1-line
telephone base. Any contemporary cordless
2-line handset can register to any contemporary
cordless 2-line telephone base.
When a registered cordless handset is idle,
place it on another telephone base. This cordless
handset automatically registers to the new
telephone base.
Handset battery charging
The battery must be fully charged before using
the cordless handset for the first time. The
CHARGE LED turns on when the cordless handset
is charging on the telephone base, charging
stand. The battery is fully charged after 16 hours
of continuous charging. For best performance,
keep the cordless handset in the telephone base,
charging stand when not in use.
EN - 13