Table of Contents
Advertisement
Charger - HD1 Charger
Charging Stand installation
The telephone comes ready for desktop use.
1. Install the charger base as shown below.
• Make sure the power adapter is securely
plugged into an outlet not controlled by
a wall switch.
2. Bend a small paper clip and gently insert it
to the Handset battery ON pinhole to turn
on the handset.
• Without turning on the battery, the
handset cannot be charged or operate.
• The battery is fully charged after 16
hours of continuous charging. For best
performance, keep the cordless handset
in the charging stand when not in use.
/SPEAKER on the handset. Listen
3. Press
for a dial tone, and then press
again to hang up.
CAUTIONS
Use only the supplied power adapter. The
supplied power adapter is not designed for
use in any other IT devices. Misusing it on your
other IT devices shall be prohibited. To order
a replacement, contact authorized service
personnel, your seller, or Snom.
/SPEAKER
EN - 12
Advertisement
Table of Contents
