Product Networking Application; Wireless Networking Settings - Waveshare RS232/485 TO WIFI POE ETH (B) User Manual

RS232/485 TO WIFI POE ETH (B) User Manual

5. PRODUCT NETWORKING APPLICATION

The RS232/485 TO WIFI POE ETH (B) serial server can be configured as either a wireless STA or
an AP. So RS232/485 TO WIFI POE ETH (B) logically supports two wireless interfaces, one as an STA
and the other as an AP. Other STAs can be connected to the wireless network through the AP
interface of this serial server. At the same time, the RS232/485 TO WIFI POE ETH (B) serial port server
provides a 100M Ethernet interface, through which users can achieve interworking of WIFI, serial port,
and Ethernet port. In terms of networking, RS232/485 TO WIFI POE ETH (B) serial server supports
bridging mode and routing mode to correspond to different specific applications.
The RS232/485 TO WIFI POE ETH (B) serial server supports two communication methods:
wireless WIFI and wired Ethernet, providing a very flexible networking method and network topology.
<Note>:
AP: Wireless access point, which is the central node of a wireless network. The commonly used
wireless router is an AP, and other wireless terminals can connect to each other through the AP.
STA: refers to a wireless station, which is a terminal of a wireless network. Such as notebook
computer, PDA, etc.

5.1 WIRELESS NETWORKING SETTINGS

Figure Batch Parameter Configuration Page
28
www.waveshare.com