Waveshare RS232/485 TO WIFI POE ETH (B) User Manual page 50

RS232/485 TO WIFI POE ETH (B) User Manual
The user can also set it through the AT command.
(1) Set/query long/short connection of HTTPDClient, taking short connection as an example;
AT+HTTPSCEN=short
(2) Set/query timeout interval (3-65535) seconds in short connection mode; Take 3 seconds as an
example;
AT+HTTPSCT=3
HTTPD POST measured demonstration:
（1）Set the HTTPD Client POST parameter through the web page:
Figure HTTPDClient Short Connection Timeout Settings
50
www.waveshare.com