Sta Joins The Routing Function; Sta Address Binding Function; Socket Communication - Waveshare RS232/485 TO WIFI POE ETH (B) User Manual

RS232/485 TO WIFI POE ETH (B) User Manual
4.WPA2-PSK/AES
Note: The passwords of WPA-PSK and WPA2-PSK are 8-63 digits.

6.2.3 STA JOINS THE ROUTING FUNCTION

The working mode of RS232/485 TO WIFI POE ETH (B) is set to Station mode. Click the "Search"
button in the "Wireless Terminal Settings" page, and a window will pop up to display the information
of the surrounding AP. After selecting the router, you will return to the original page. At this time, the
encryption mode and encryption algorithm have been filled in, and you only need to write the
password as prompted.

6.2.4 STA ADDRESS BINDING FUNCTION

RS232/485 TO WIFI POE ETH (B) supports the function of binding the BSSID of the destination
network during the networking process (as STA, during the AP connection process). According to the
802.11 protocol, different wireless networks can have the same network name (i.e. SSID/ESSID), but
must correspond to a unique BSSID address (i.e. MAC address). Because illegal intruders can establish
wireless networks with the same SSID/ESSID to connect STAs in the network to illegal APs, resulting in
network leakage. So by binding BSSID addresses, STA can be prevented from accessing illegal
networks, thereby improving the security of wireless networks.

6.3 SOCKET COMMUNICATION

The working methods of SocketA include: TCP Server, TCP Client, UDP Server, and UDP Client.
Currently, SocketB supports TCP client and UDP Client.
When SocketA is configured as TCPServer, it can support up to a maximum of 24 TCP client
connections in the TCP link. In a multi TCP link connection, data transmitted from TCP will be
forwarded one by one to the serial port. The data coming from the serial port will be duplicated and
forwarded to each TCP connection, resulting in multiple copies being sent to each connected TCP link.
The specific data flow chart is shown as follows:
57
www.waveshare.com