RS232/485 TO WIFI POE ETH (B) User Manual
<Note>:
"Restart Module" Button: After users have configured parameters on various pages and clicked
"OK" to confirm the settings, these changes will only take effect after the user clicks "Restart" on the
module management page. After clicking "Reboot", the RS232/485 TO WIFI POE ETH (B) serial server
reset and reboot, refreshing the previous configuration information stored in the memory.
4.2 SOFTWARE CONFIGURATION
4.2.1 DOWNLOAD LINK
WiFi high-performance series configuration software download link:
4.2.2 SOFTWARE INTRODUCTION
The serial server parameter can be queried and configured through a serial connection or by
connecting to the same local network.
Figure Module Management Page
26
www.waveshare.com