Saturator; Warm Saturator - Roland VERSELAB MV-1 Parameter Manual

84 Saturator

This effect combines overdrive and filter.
L in
Pre Filter Pre Filter Overdrive Overdrive
R in
Pre Filter Pre Filter Overdrive Overdrive
Parameter Value
THRU, LPF, HPF, LSV,
DrvPre1 Type
HSV
DrvPre1 Frequency 20–16000 [Hz]
DrvPre1 Gain -24.0–+24.0 [dB]
Drive 0.0–+48.0 [dB]
THRU, LPF, HPF, LSV,
DrvPost1 Type
HSV
DrvPost1 Frequency 20–16000 [Hz]
DrvPost1 Gain -24.0–+24.0 [dB]
THRU, LPF, HPF, LSV,
DrvPost2 Type
HSV
DrvPost2 Frequency 20–16000 [Hz]
DrvPost2 Gain -24.0–+24.0 [dB]
THRU, LPF, HPF, BPF,
DrvPost3 Type
PKG
DrvPost3 Frequency 20–16000 [Hz]
DrvPost3 Gain -24.0–+24.0 [dB]
DrvPost3 Q 0.5–16.0
Makeup Sense -60.0–0.0 [dB]
DrvPost Gain -48.0–+12.0 [dB]
Drive Balance D100:0W–D0:100W
Level 0–127
Balance D
Post Filter1-3 Post Filter1-3
Balance W
Post Filter1-3 Post Filter1-3
Balance D
Explanation
Type of filter that precedes the distortion
processing
THRU: No filter is applied
LPF: A filter that passes the sound below the
specified frequency
HPF: A filter that passes the sound above the
specified frequency
LSV: A filter that boosts/cuts the sound below
the specified frequency
HSV: A filter that boosts/cuts the sound above
the specified frequency
Frequency at which the pre-distortion filter
operates
For the LSV/HSV types, the amount of boost/
cut
Strength of distortion
Type of filter 1 which follows the distortion
processing
Frequency at which post-distortion filter 1
operates
For the LSV/HSV types, the amount of boost/
cut
Type of filter 2 which follows the distortion
processing
Frequency at which post-distortion filter 2
operates
For the LSV/HSV types, the amount of boost/
cut
Type of filter 3 which follows the distortion
processing
THRU:
No filter is applied
LPF: A filter that passes the sound below the
specified frequency
HPF: A filter that passes the sound above the
specified frequency
BPF:
A filter that passes only the specified
frequency
PKG:
A filter that boosts/cuts the specified
frequency
Frequency at which post-distortion filter 3
operates
For the PKG type, the amount of boost/cut
Width of the frequency range affected by the
filter
Adjust this value so that the sound is not
made louder when distortion is applied.
Gain following distortion processing
Volume balance between the dry sound (D)
and effect sound (W)
Output Level

85 Warm Saturator

This is a variety of saturator, and is distinctive for its warmer sound.
L out L in
Low/High Low/High
R out R in
Low/High Low/High
Parameter Value
EQ Low Frequency 20–16000 [Hz]
EQ Low Gain -24–+24 [dB]
EQ High Slope THRU, -12dB, -24dB
EQ High Frequency 20–16000 [Hz]
THRU, LPF, HPF, LSV,
DrvPre1 Type
HSV
DrvPre1 Frequency 20–16000 [Hz]
DrvPre1 Gain -24.0–+24.0 [dB]
Drive 0.0–+48.0 [dB]
THRU, LPF, HPF, LSV,
DrvPost1 Type
HSV
DrvPost1 Frequency 20–16000 [Hz]
DrvPost1 Gain -24.0–+24.0 [dB]
THRU, LPF, HPF, LSV,
DrvPost2 Type
HSV
DrvPost2 Frequency 20–16000 [Hz]
DrvPost2 Gain -24.0–+24.0 [dB]
THRU, LPF, HPF, LSV,
DrvPost3 Type
HSV
DrvPost3 Frequency 20–16000 [Hz]
DrvPost3 Gain -24.0–+24.0 [dB]
DrvPost3 Q 0.5–16.0
Makeup Sense -60.0–0.0 [dB]
DrvPost Gain -48.0–+12.0 [dB]
MFX Parameters
Post Post
Pre Filter Pre Filter Overdrive Overdrive
Filter1-3 Filter1-3
Balance W
Post Post
Pre Filter Pre Filter Overdrive Overdrive
Filter1-3 Filter1-3
Explanation
Input filter (low range)
Boosts/cuts the sound below the specified
frequency.
Amount of boost/cut
Input filter (high range)
Boosts/cuts the sound above the specified
frequency.
Amount of boost/cut
Types of filter that precedes the distortion
processing
THRU: No filter is applied
LPF:
A filter that passes the sound below the
specified frequency
HPF: A filter that passes the sound above the
specified frequency
LSV: A filter that boosts/cuts the sound below
the specified frequency
HSV: A filter that boosts/cuts the sound above
the specified frequency
Frequency at which the pre-distortion filter
operates
For the LSV/HSV types, the amount of boost/
cut
Strength of distortion
Type of filter 1 which follows the distortion
processing
Frequency at which post-distortion filter 1
operates
For the LSV/HSV types, the amount of boost/
cut
Type of filter 2 which follows the distortion
processing
Frequency at which post-distortion filter 2
operates
For the LSV/HSV types, the amount of boost/
cut
Type of filter 3 which follows the distortion
processing
THRU: No filter is applied
LPF: A filter that passes the sound below the
specified frequency
HPF: A filter that passes the sound above the
specified frequency
BPF: A filter that passes only the specified
frequency
PKG: A filter that boosts/cuts the specified
frequency
Frequency at which post-distortion filter 3
operates
For the PKG type, the amount of boost/cut
Width of the frequency range affected by the
filter
Adjust this value so that the sound is not
made louder when distortion is applied.
Gain following distortion processing
Balance D
L out
R out
Balance D
49