Vocal Processor - Roland VERSELAB MV-1 Parameter Manual

Parameter Value
Diffusion 0–127
LF Damp Freq 50–4000 [Hz]
LF Damp Gain -36–0 [dB]
HF Damp Freq 4000–12500 [Hz]
HF Damp Gain -36–0 [dB]
GS
Parameter Value
ROOM1–3,
Character HALL1–2, PLATE,
DELAY, PAN-DELAY
Pre-LPF 0–7
Time 0–127
Delay Feedback 0–127
SRV2000
Parameter Value
Selects the type of reverb offered by the Roland SRV-2000 digital
reverb.
Pre Delay
Selection
Time
HF Damp
Density
Pre Delay 0–160
Time 1–990 [msec]
HF Damp 0.05–1.00
Density 0–9
Attack Gain 0–9
Attack Time 0–9
ER Density 0–9
ER Level 0–99
EQ Low Freq 0.04–1.00 [kHz]
EQ Low Gain -24–+12 [dB]
EQ Mid Freq 0.25–9.99 [kHz]
EQ Mid Gain -24–+12 [dB]
EQ Mid Q 0.2–9.0
EQ Hi Freq 0.80–9.99 [kHz]
EQ Hi Gain -24–+12 [dB]
EQ Hi Q 0.2–9.0
SRV2000
(NON-LINEAR)
Parameter Value
Pre Delay 0–160
Explanation
Adjusts how reverb density increases over
time. (This effect is especially noticeable with
long reverb times.)
Frequency below which the low-frequency
portion of the reverb sound is cut.
LF damp attenuation amount (0: no effect)
Frequency above which the high-frequency
portion of the reverb sound is cut
HF damp attenuation amount (0: no effect)
Explanation
Type of reverb
Amount of high-frequency attenuation for
the sound being input to the reverb
Adjusts the decay length of the reverb sound.
Level at which the reverb sound is returned
to the input
Explanation
Room reverb.
Higher values increase the size of the room.
Hall reverb.
Higher values increase the size of the concert
hall.
Plate reverb.
A more flamboyant reverb sound than P-A.
Plate reverb.
Adjusts the delay time from the direct sound
until the reverb sound is heard.
Adjusts the decay length of the reverb sound.
Adjusts the high-frequency portion of the
reverb.
Adjusts the density of the late reverberation.
Adjusts the gain of the early reflections.
Adjusts the time of the early reflections.
Adjusts the density of the early reflections.
Adjusts the volume of the early reflections.
Frequency of the low range.
Gain of the low frequency range.
Adjusts the amount of mid-frequency boost/
cut.
Specifies the reference frequency of the mid-
frequency range.
Specifies the width of the mid-frequency
range.
Set a higher value for Q to narrow the range
to be affected.
Frequency of the high range.
Gain of the high frequency range.
Specifies the width of the high-frequency
range.
Set a higher value for Q to narrow the range
to be affected.
Explanation
Adjusts the delay time from the direct sound
until the reverb sound is heard.
Parameter Value
Reverb Time 1–990 [msec]
Gate Time 10–450 [msec]
HF Damp 0.05–1.00
EQ Low Freq 0.04–1.00 [kHz]
EQ Low Gain -24–+12 [dB]
EQ Mid Freq 0.25–9.99 [kHz]
EQ Mid Gain -24–+12 [dB]
EQ Mid Q 0.2–9.0
EQ Hi Freq 0.80–9.99 [kHz]
EQ Hi Gain -24–+12 [dB]
EQ Hi Q 0.2–9.0
GM2 REVERB
Parameter Value
Character 0–5
Time 0–127

VOCAL PROCESSOR

Parameter Value
EXT IN, PC IN, VOCAL-
Pos
DRY, VOCAL MFX
Specify the key of the song that you're singing.
Major
Minor
Key
Major
Minor
Noise Tres 0-100
Level 0-127
(No Assign), Noise
Tres, Level, Enhance,
Compress, De-Esser,
Low Gain, High Gain,
TONE L.Mid Gain, H.Mid
Gain, Robot Note,
Pan, Formant, Shift,
Speed, Stability, Hrm
E.Level
Effect Parameters
Explanation
Adjusts the decay length of the reverb sound.
Adjusts the decay length of the reverb sound.
Adjusts the high-frequency portion of the
reverb.
Frequency of the low range.
Gain of the low frequency range.
Adjusts the amount of mid-frequency boost/
cut.
Specifies the reference frequency of the mid-
frequency range.
Specifies the width of the mid-frequency
range.
Set a higher value for Q to narrow the range
to be affected.
Frequency of the high range.
Gain of the high frequency range.
Specifies the width of the high-frequency
range.
Set a higher value for Q to narrow the range
to be affected.
Explanation
Type of reverb
Adjusts the decay length of the reverb sound.
Explanation
Location of the vocal processor.
Adjusts the depth of the noise suppressor.
Adjusts the volume.
Sets the function to assign to the [TONE]
knob.
13