Epampsim Phaser; Epampsim Delay; Enhancer Chorus - Roland VERSELAB MV-1 Parameter Manual

MFX Parameters
0
64 EPAmpSim
L in
EP Amp EP Amp Speaker Speaker
R in
Parameter Value
OLDCASE
Type
NEWCASE
Bass -50–+50
Treble -50–+50
Phaser Switch OFF, ON
Phaser Rate OFF, ON
(sync sw)
Phaser Rate 0.05–10.00 [Hz]
(Hz)
Note
Phaser Rate
(note)
&
"Note" (p. 51)
Phaser Manual 0–127
Phaser Depth 0–127
Phaser Resonance 0–127
Phaser Mix 0–127
LINE, OLD, NEW,
Speaker Type
WURLY, TWIN
OD Switch OFF, ON
OD Gain 0–127
OD Drive 0–127
Level 0–127
0
65 EPAmpSim
L in
EP Amp EP Amp Speaker Speaker
R in
Parameter Value
OLDCASE
Type
NEWCASE
Bass -50–+50
Treble -50–+50
Delay Switch OFF, ON
Delay Time OFF, ON
(sync sw)
Delay Time 1–1300 [msec]
(msec)
Note
Delay Time
(note)
&
"Note" (p. 51)
Delay Accel 0–15
42
Phaser
Phaser Phaser
Mix
Resonance
Explanation
Type of amp
A standard electric piano sound of the early
70s
A standard electric piano sound of the late
70s and early 80s
Amount of low-frequency boost/cut
Amount of high-frequency boost/cut
Phaser on/off
If this is ON, the rate synchronizes with the
tempo of the rhythm.
Modulation rate
Center frequency at which the sound is
modulated
Depth of modulation
Amount of feedback
Level of the phase-shifted sound
Type of speaker
If LINE is selected, the sound will not be sent
through the speaker simulation.
Overdrive on/off
Overdrive input level
Degree of distortion
Also changes the volume.
Output Level
Delay
Balance D
Balance W
Time Ctrl Time Ctrl
Delay Delay
Balance W
Feedback
Balance D
Explanation
Type of amp
A standard electric piano sound of the early
70s
A standard electric piano sound of the late
70s and early 80s
Amount of low-frequency boost/cut
Amount of high-frequency boost/cut
Delay on/off
If this is ON, the rate synchronizes with the
tempo of the rhythm.
Delay time from when the original sound is
heard to when the delay sound is heard
Speed at which the current delay time
changes to the specified delay time when
you change the delay time.
This affects the speed of pitch change as well
as the delay time.
Parameter Value
Delay Feedback -98–+98 [%]
L out
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
Delay HF Damp 1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000,
BYPASS [Hz]
R out
Delay Balance D100:0W–D0:100W
LINE, OLD, NEW,
Speaker Type
WURLY, TWIN
OD Switch OFF, ON
OD Gain 0–127
OD Drive 0–127
Level 0–127
66 Enhancer
L in
Enhancer Enhancer
R in
Enhancer Enhancer
Parameter Value
Enhancer Sens 0–127
Enhancer Mix 0–127
Chorus Pre Delay 0.0–100 [msec]
Chorus Rate OFF, ON
(sync sw)
Chorus Rate 0.05–10.00 [Hz]
(Hz)
Note
Chorus Rate
(note)
&
L out
Chorus Depth 0–127
Chorus Balance D100:0W–D0:100W
R out
Level 0–127
Explanation
Adjusts the proportion of the delay sound
that is fed back into the effect. Negative (-)
settings will invert the phase.
Frequency at which the high-frequency
portion of the delay sound will be cut
(BYPASS: no cut)
Adjusts the volume balance between the
sound that is sent through the delay (W) and
the sound that is not sent through the delay
(D).
Type of speaker
If LINE is selected, the sound will not be sent
through the speaker simulation.
Overdrive on/off
Overdrive input level
Degree of distortion
Also changes the volume.
Output Level
0
Chorus
Balance D
Mix
Chorus Chorus
Mix Balance D
Explanation
Sensitivity of the enhancer
Level of the overtones generated by the
enhancer
Adjusts the delay time from the direct sound
until the chorus sound is heard.
If this is ON, the rate synchronizes with the tempo
of the rhythm.
Frequency of modulation
"Note"
(p. 51)
Depth of modulation
Adjusts the volume balance between the
sound that is sent through the chorus (W)
and the sound that is not sent through the
chorus (D).
Output Level
L out
Balance W
Balance W
R out