Epampsim Tremolo; Epampsim Chorus; Epampsim Flanger - Roland VERSELAB MV-1 Parameter Manual

0
61 EPAmpSim
L in
EP Amp EP Amp
R in
Parameter Value
OLDCASE
Type
NEWCASE
WURLY
Bass -50–+50
Treble -50–+50
Tremolo Switch OFF, ON
Tremolo Speed
(sync
OFF, ON
sw)
Tremolo Speed 0.05–10.00 [Hz]
(Hz)
Note
Tremolo Speed
(note)
&
"Note" (p. 51)
Tremolo Depth 0–127
Tremolo Duty -10–+10
LINE, OLD, NEW,
Speaker Type
WURLY, TWIN
OD Switch OFF, ON
OD Gain 0–127
OD Drive 0–127
Level 0–127
0
62 EPAmpSim
L in
EP Amp EP Amp
R in
Parameter Value
OLDCASE
Type
NEWCASE
Bass -50–+50
Treble -50–+50
Chorus Switch OFF, ON
Chorus Pre Delay 0.0–100 [msec]
Chorus Rate OFF, ON
(sync sw)
Chorus Rate 0.05–10.00 [Hz]
(Hz)
Note
Chorus Rate
(note)
&
"Note"
(p. 51)
Chorus Depth 0–127
Chorus Balance D100:0W–D0:100W
Tremolo
Speaker Speaker Tremolo Tremolo
Explanation
Type of amp
A standard electric piano sound of the early
70s
A standard electric piano sound of the late
70s and early 80s
A standard electric piano sound of the 60s
Amount of low-frequency boost/cut
Amount of high-frequency boost/cut
Tremolo on/off
If this is ON, the rate synchronizes with the tempo
of the rhythm.
Rate of the tremolo effect
Depth of the tremolo effect
Adjusts the duty cycle of the LFO waveform
used to apply tremolo.
Type of speaker
If LINE is selected, the sound will not be sent
through the speaker simulation.
Overdrive on/off
Overdrive input level
Degree of distortion
Also changes the volume.
Output Level
Chorus
Balance D
Balance W
Speaker Speaker Chorus Chorus
Balance W
Balance D
Explanation
Type of amp
A standard electric piano sound of the early
70s
A standard electric piano sound of the late
70s and early 80s
Amount of low-frequency boost/cut
Amount of high-frequency boost/cut
Chorus on/off
Adjusts the delay time from the direct sound
until the chorus sound is heard.
If this is ON, the rate synchronizes with the
tempo of the rhythm.
Frequency of modulation
Depth of modulation
Adjusts the volume balance between the
sound that is sent through the chorus (W)
and the sound that is not sent through the
chorus (D).
Parameter Value
LINE, OLD, NEW,
Speaker Type
WURLY, TWIN
L out
OD Switch OFF, ON
OD Gain 0–127
R out
OD Drive 0–127
Level 0–127
63 EPAmpSim
L in
EP Amp EP Amp
R in
Parameter Value
OLDCASE
Type
NEWCASE
Bass -50–+50
Treble -50–+50
Flanger Switch OFF, ON
Flanger Pre Delay 0.0–100 [msec]
Flanger Rate OFF, ON
(sync sw)
Flanger Rate 0.05–10.00 [Hz]
(Hz)
Note
Flanger Rate
(note)
&
Flanger Depth 0–127
Flanger Feedback -98–+98 [%]
L out
Flanger Balance D100:0W–D0:100W
R out
LINE, OLD, NEW,
Speaker Type
WURLY, TWIN
OD Switch OFF, ON
OD Gain 0–127
OD Drive 0–127
Level 0–127
Explanation
Type of speaker
If LINE is selected, the sound will not be sent
through the speaker simulation.
Overdrive on/off
Overdrive input level
Degree of distortion
Also changes the volume.
Output Level
0
Flanger
Feedback
Speaker Speaker Flanger Flanger
Explanation
Type of amp
A standard electric piano sound of the early
70s
A standard electric piano sound of the late
70s and early 80s
Amount of low-frequency boost/cut
Amount of high-frequency boost/cut
Flanger on/off
Adjusts the delay time from the direct sound
until the flanger sound is heard.
If this is ON, the rate synchronizes with the
tempo of the rhythm.
Frequency of modulation
"Note" (p. 51)
Depth of modulation
Adjusts the proportion of the flanger sound
that is fed back into the effect. Negative (-)
settings will invert the phase.
Adjusts the volume balance between the
sound that is sent through the flanger (W)
and the sound that is not sent through the
flanger (D).
Type of speaker
If LINE is selected, the sound will not be sent
through the speaker simulation.
Overdrive on/off
Overdrive input level
Degree of distortion
Also changes the volume.
Output Level
MFX Parameters
Balance D
L out
Balance W
Balance W
R out
Balance D
41