Rotary; Vk Rotary - Roland VERSELAB MV-1 Parameter Manual

21 Rotary

This simulates a classic rotary speaker of the past.
Since the operation of the high-frequency and low-frequency rotors
can be specified independently, the distinctive modulation can be
reproduced realistically. This is most effective on organ patches.
L in
Rotary Rotary
R in
Parameter Value
Speed SLOW, FAST
Woofer Slow Speed 0.05–10.00 [Hz]
Woofer Fast Speed 0.05–10.00 [Hz]
Woofer Acceleration 0–15
Woofer Level 0–127
Tweeter Slow Speed 0.05–10.00 [Hz]
Tweeter Fast Speed 0.05–10.00 [Hz]
Tweeter Acceleration 0–15
Tweeter Level 0–127
Separation 0–127
Level 0–127
L out
R out
Explanation
Simultaneously switch the rotational speed of
the low frequency rotor and high frequency
rotor.
SLOW:
Slows down the rotation to the Slow
Rate.
FAST:
Speeds up the rotation to the Fast Rate.
Slow speed (SLOW) of the low frequency
rotor
Fast speed (FAST) of the low frequency rotor
Adjusts the time it takes the low frequency
rotor to reach the newly selected speed when
switching from fast to slow (or slow to fast)
speed.
Volume of the low frequency rotor
Settings of the high frequency rotor
The parameters are the same as for the low
frequency rotor
Spatial dispersion of the sound
Output Level

22 VK Rotary

This type provides modified response for the rotary speaker, with the
low end boosted further.
This effect features the same specifications as the VK-7's built-in rotary
speaker.
L in
Rotary Rotary
R in
Parameter Value
Speed SLOW, FAST
Brake OFF, ON
Woofer Slow Speed 0.05–10.00 [Hz]
Woofer Fast Speed 0.05–10.00 [Hz]
Woofer Trans Up 0–127
Woofer Trans Down 0–127
Woofer Level 0–127
Tweeter Slow Speed 0.05–10.00 [Hz]
Tweeter Fast Speed 0.05–10.00 [Hz]
Tweeter Trans Up 0–127
Tweeter Trans Down 0–127
Tweeter Level 0–127
Spread 0–10
Low Gain -15–+15 [dB]
High Gain -15–+15 [dB]
Level 0–127
OD Switch OFF, ON
OD Gain 0–127
OD Drive 0–127
OD Level 0–127
MFX Parameters
L out
2-Band EQ 2-Band EQ
R out
2-Band EQ 2-Band EQ
Explanation
Rotational speed of the rotating speaker
SLOW: Slow
FAST: Fast
Switches the rotation of the rotary speaker.
When this is turned on, the rotation will
gradually stop. When it is turned off, the
rotation will gradually resume.
Low-speed rotation speed of the woofer
High-speed rotation speed of the woofer
Adjusts the rate at which the woofer rotation
speeds up when the rotation is switched from
Slow to Fast.
Adjusts the rate at which the woofer rotation
speeds up when the rotation is switched from
Fast to Slow.
Volume of the woofer
Settings of the tweeter
The parameters are the same as for the
woofer.
Sets the rotary speaker stereo image.
Gain of the low range
Gain of the high range
Output Level
Overdrive on/off
Overdrive input level
Higher values will increase the distortion.
Degree of distortion
Volume of the overdrive
23