Cleaning And Maintenance; Cleaning - EAS Electric EMV701DGN Instruction Manual

CLEAN AND MAINTENANCE

Cleaning

Disconnect the power supply before cleaning and maintenance. In order to ensure
the life of the oven, clean it in time after cooking. Cleaning steps are as follows:
1. After cooking, wait for the oven to cool completely.
2.
Remove oven accessories, rinse with warm water and dry.
3. Remove food residues and oil stains from the oevn cavity.
4.
Clean the oven surface with a soft cloth dampened with detergent and dry.
5.
Start the water clean function as follows:
1). Add about 250 ml of purified water and an appropriate amount of dish soap to
the cavity and stir well.
2). With the oven door closed, turn Knob K1 to the "
3). Turn knob K2 to the "100°C" position.
4). Select dur mode and set the time to 30 minutes.
5). Press the "
6. After the water clean function is completed, wait for the oven to cool completely.
Then dry the furnace oven cavity with clean absorbent sponge or soft cloth.
Notes
1.
Do not use sharp cleaning tools, hard brush and corrosive cleaning products, so as
not to damage the machine and its accessories.
2. Do not use rough scrubbing agent or sharp metal spatula to clean the door glass.
" key to start.
" position.
15
V.1