Lamp Replacement - EAS Electric EMV701DGN Instruction Manual

Lamp Replacement

1.
Switch off and disconnect the power from the oven. Ensure that the internal parts
are cool before touching internal parts.
2.
Remove the lamp cover by turning it counter-clockwise (note, it may be stiff),
replace the bulb with a new one of the same type.
3. Insert the new bulb, which should be resistant to 300°C. For replacement bulbs
contact your local service centre.
4. Re-fit the cover.
5. If in any doubt, consult a qualified electrician for help.
WARNING:
To avoid electric shocks-please ensure that the electricity supply to the appliance is
switched off and the appliance is fully cold. before removing the lamp lens.
16
V.1