Using A Usb Key To Connect A Windows Computer - Epson EB-PU1008 User Manual

Wireless Network Connection
• If you do not see the QR code, set the Display LAN Info.
setting to Text & QR Code in the projector's Network menu.
a s Network > Network Configuration > Basic > Display
LAN Info.
• To hide the QR code, press [Esc].
• When the QR code is hidden, press [Enter] to display the code.
b Start Epson iProjection on your mobile device.
c
Read the projected QR code using Epson iProjection to connect it to
the projector.
To correctly read the QR code, make sure you face the screen
squarely and closely enough so that the projected code fits into
the guide of the mobile device's QR code reader. If you are too
a
far from the screen, the code may not be read.
When a connection is established, select Contents menu from
then select the file you want to project.

Using a USB Key to Connect a Windows Computer

You can set up your USB flash drive as a USB key to quickly connect the
projector to a wireless LAN supported Windows computer. After creating the
USB key, you can quickly project images from the network projector.
Set up the USB key using USB Key Setup Tool of the Epson iProjection
a
(Windows) software.
See the Epson iProjection Operation Guide (Windows/Mac) for
instructions.
a
b Make sure the wireless LAN module is installed into your projector.
c Turn on the projector.
d Press the [LAN] button on the remote control.
The LAN standby screen is displayed. Verify that an SSID and IP
address are displayed.
e Remove the wireless LAN module from the projector's USB-A port (if
installed) and insert the USB key into the same port.
You see a projected message that the network information update is
complete.
f
Remove the USB key.
If your projector needs the wireless LAN module, reinsert the wireless
LAN module into the projector.
g
Connect the USB key to a USB port on your computer.
, and
h Follow the on-screen instructions to install the necessary application.
• If the Windows Firewall message is displayed, click Yes to
a
• You need administrator authority to install the software.
• If it is not installed automatically, double-click
After a few minutes, your computer image is displayed by the projector.
i When you have finished projecting wirelessly, select the Safely Remove
Hardware option in the Windows taskbar, and then remove the USB
key from your computer.
You may need to restart your computer to reactivate your
wireless LAN connection.
a
disable the firewall.
MPPLaunch.exe in the USB key.
44