Using A Usb Key To Connect A Windows Computer - Epson EB-992F User Manual

Wireless Network Projection

Using a USB Key to Connect a Windows Computer

You can set up your USB flash drive as a USB key to quickly connect the
projector to a wireless LAN supported Windows computer. After creating the
USB key, you can quickly project images from the network projector.
a Set up the USB key using Epson iProjection (Windows/Mac) software.
See the Epson iProjection Operation Guide (Windows/Mac) for
instructions.
a
b
Make sure the wireless LAN module is installed or built into your
projector.
c Turn on the projector.
d Press the [LAN] button on the remote control.
The LAN standby screen is displayed. Verify that an SSID and IP
address are displayed.
e Do one of the following to connect the USB key.
• Connect the USB key to the projector's USB-A port. (Models with a
built-in wireless LAN module.)
• Remove the wireless LAN module from the projector and insert the
USB key into the same port used for the wireless LAN module.
(Models with the optional wireless LAN module installed.)
You see a projected message that the network information update is
complete.
f Remove the USB key.
If your projector needs the wireless LAN module, reinsert the wireless
LAN module into the projector. (Models with the optional wireless
LAN module installed.)
g Connect the USB key to a USB port on your computer.
h Follow the on-screen instructions to install the necessary application.
• If the Windows Firewall message is displayed, click Yes to
disable the firewall.
a
• You need administrator authority to install the software.
• If it is not installed automatically, double-click
MPPLaunch.exe in the USB key.
After a few minutes, your computer image is displayed by the projector.
i When you have finished projecting wirelessly, select the Safely Remove
Hardware option in the Windows taskbar, and then remove the USB
key from your computer.
You may need to restart your computer to reactivate your
wireless LAN connection.
a
98