Selecting Wireless Network Settings Manually - Epson EB-PU1008 User Manual

Wireless Network Connection
c Connect the Wireless LAN module to the wireless LAN module slot.
d
Replace the air filter cover as shown and tighten the screws.

Selecting Wireless Network Settings Manually

Before you can project from your wireless network, you need to select
network settings for the projector.
a Press the [Menu] button, select the Network menu, and press [Enter].
Select On as the Wireless LAN Power setting.
b
c Select Network Configuration and press [Enter].
d Select the Basic menu and press [Enter].
e Select the basic options as necessary.
• Projector Name lets you enter a name up to 16 alphanumeric
characters long to identify the projector over the network.
• PJLink Password lets you enter a password up to 32 alphanumeric
characters long for using the PJLink protocol for projector control.
• Remote Password lets you enter a password up to 32 alphanumeric
characters long to access the projector using the Basic Control. (User
name is EPSONREMOTE; default password is the projector's serial
number.)
• Web Control Password lets you enter a password up to 32
alphanumeric characters long to access the projector over the Web.
(User name is EPSONWEB; default password is the projector's serial
number.)
• Moderator Password lets you enter a four-digit number password
for accessing the projector as a moderator using Epson iProjection.
(No password is set by default.)
• Projector Keyword lets you turn on a security password to prevent
access to the projector by anyone not in the room with it. You must
enter a displayed, randomized keyword from a computer using
Epson iProjection to access the projector and share the current
screen.
40