Removing An M.2 Module - Fujitsu ESPRIMO D7 Series Operating Manual

Removing an M.2 module

► Remove the casing cover (see chapter
► Fold out the drive cage (see chapter
► Undo the screw (1).
► Pull the M.2 module (b) slightly at an angle in the direction of the arrow (2) and out
of the slot (a) on the mainboard and remove it from the casing.
► Fold the drive cage into the closed position again (see chapter
► Fit the casing cover onto the casing again (see chapter
If necessary, you must adjust the entry for the M.2 module accordingly in the BIOS Setup.
Fujitsu
"Removing the casing cover", Page
"Opening the drive cage", Page
"Reattaching the casing cover.", Page
System expansions
34).
45).
a
2
b b
"Closing the drive cage", Page
1
46).
35).
59