Closing The Board Retaining Mechanism - Fujitsu ESPRIMO D7 Series Operating Manual

System expansions

Closing the board retaining mechanism

1
► Fold the board retaining mechanism to the closed position (1).
► If necessary, also secure the board clip with the optional safety screw when present.
► Fit the casing cover back onto the casing (see Chapter
If you have installed or removed a board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the PCI board documentation.
64
"Reattaching the casing cover.", Page 35).
Fujitsu