Maintenance Service, Every 10 Hours - Volvo ECR25 Electric Operator's Manual

Maintenance
162

Maintenance service, every 10 hours

Maintenance service, every 10
hours
Test-run and check
Performed daily.
Warning decals
1 Check that all warning, information decals/plates
and reflectors are in place, are legible, and are
not damaged, refer to page
External check
1 Check that the machine does not have any
external damage or defective/loose parts.
Especially tires, hoses, and pipes.
2 Check that there are no visible leaks.
3 Check that all protective covers, and the hood is
closed.
4 Clean/scrape windows and rear-view mirrors.
5 Check that the work lights and headlights are
clean and intact.
6 Check that the wheels are not blocked.
7 Check the service battery. The cable terminals
and pole studs must be clean, well tightened and
coated with vaseline or similar.
8 Check that all access paths for maintenance is
clear.
Lights, instruments, and controls
1 Turn the ignition to position 1 (operating position)
and check that all control lights turn on.
2 Check the function of the work lights and
headlights.
3 Check the function of the wiper and washer
system.
4 Check that the lap-type seatbelt can be buckled
up and is not damaged. Fasten the lap-type
seatbelt.
5 Check that there are no persons near the
machine, refer to page
6 Start the machine. refer to page
25 .
76 .
83