Wiring Diagram - ESX VISION ANDROID Series Installation Manual

WIRING DIAGRAM

GPS antenna
DAB antenna
Radio antenna plug from vehicle (FM/AM)
S
System cable set (20-pin plug, black)
Cable brown (BRAKE):
Cable pink (REVERSE):
Cable white (KEY1):
Cable black/white (KEY2):
Cable brown/black (CAN-RXD):
Cable black (GND):
Cable orange (AMP CON)*:
* must be activated in the Naviceiver in the app "DSP" under "EXT AMP" (max. 300 mA)
A
AV cable set 1 (14-pin plug, black)
RCA white (FL):
RCA red (FR):
RCA white (RL):
RCA red (RR):
RCA green (SUB):
RCA yellow (VIDEO OUT 1):
RCA yellow (VIDEO OUT 2):
RCA yellow (VIDEO AUX IN):
RCA yellow (R-CAM IN):
If necessary, use the CAM +12V and CAM GND connections of the enclosed connection plug G (8-pin
plug, blue) to supply power to the camera.
* Only for compatible AHD cameras such as VNA-RCAM-DBJ228HD or VNA-RCAM-CS240HD.
NOTE: Refer to page 12 for more information on camera settings.
6
4G/LTE antenna
WiFi antenna
A B C
E F G
Inputs for
AV cable sets
D
H
Optical stereo
audio output (S/PDIF)
Connection for handbrake signal (ground)
Connection for reverse gear signal (+12V)
Connection for analog steering wheel control (left)
Connection for analog steering wheel control (right)
Not in use
Connection for the steering wheel remote control (ground)
Turn-on signal for external amplifiers (+12V)
Audio output Front/Left
Audio output Front/Right
Audio output Rear/Left
Audio output Rear/Right
Audio output Subwoofer
Video output for external monitor 1
Video output for external monitor 2
Video input for an external signal source
Video input for analog rear view cam
Video input for analog HD rear view cam (AHD)*
Fuse 10 A
S
20-pin system socket