Important Notes; Sd Card Slot - ESX VISION ANDROID Series Installation Manual

IMPORTANT NOTES

This guide is an aid for the professional installation of the device.
Please note the following notes before installation:
• Always handle all parts of the device and the components of your vehicle with care.
• Under all circumstances observe the regulations of the vehicle manufacturer and do not
make any changes to the vehicle which could impair driving safety.
• For safety reasons, disconnect the vehicle battery's ground connection before installa-
tion.
• Please always pay attention to the correct polarity of the connections.
• Please do not modify any harnesses or connections of the device or the vehicle as this
may affect the warranty.
• Make sure that no cables are squashed or cause a short circuit.
• Do not lay cables in front of the airbags, e.g. in the dashboard or in a way that affects
their function.
NOTE: For many vehicle models, a vehicle-specific 1-DIN installation set is required for
professional installation. In order to be able to use the existing steering wheel remote control
of your vehicle, a vehicle-specific adapter may also be required. You can obtain information
about this on the Internet or from your specialist dealer.

SD CARD SLOT

If you are using navigation software that is on a micro SD card, you must insert it into the MicroSD
card slot. This is on the back of the display on the left, slightly above the middle. Therefore, insert the
MicroSD card into the card slot before installing the device.
2