ESX VISION ANDROID Series Installation Manual page 11

SETUP THE 4G/LTE INTERNET CONNECTION
4. Then turn on the device to test the 4G/LTE connection.
After the device has started, enter your 4-digit
PIN code of the SIM card here. Confirm the
entry with the tick.
If the device is successfully connected to the
mobile Internet, the
status bar at the top right. The connection can
be switched off again under SIM slot 1 in the
SIM cards menu.
5. After a successful test, install the 4G/LTE dongle in the radio slot or dashboard.
* The SIM card's PIN code can be deactivated in standard smartphones. To do this, insert the SIM card
in a smartphone and deactivate it accordingly. The steps involved vary depending on the smartphone.
symbol appears in the
After successful entry, the SIM card is un-
locked.
If the device is turned off, you have to enter
the PIN code of the SIM card again after each
restart, just like with a smartphone*.
11